Refill sublimation printer ink-how to load replacement it into the cartridge

The quality of the original ink prints is very high-definition, but at the same time the price is very expensive, so sometimes people choose to refill sublimation printer ink to replace the original ink. If you choose a better quality compatible ink, the printed quality will not be worse than the original ink.

Ink Cartridge

Compatible sublimation ink with the ink replenishment kit has two advantages, not only economically, but also environmentally friendly. This is a way of not buying a bottle often when the ink is exhausted. Because the ink in the cartridge is dry, the buyer needs to study which method to use to find an alternative to the investment cartridge. Although new and reliable ink cartridges are recommended, the price of a new ink cartridge is usually a huge setback at the time of purchase. Amazing buyer research reports were provided to third-party vendors who sell compatible ink cartridges, Remanufactured cartridges, customer cartridge refills, and do-it-yourself inkjet refill kits.

How to use the supplement kit printer:

1. When refilling the cartridge, first place it on a rag such as an old newspaper or an old towel. Cloth is ideal because it absorbs excess ink immediately.
2. Wash the ink stains with soap and water. If it fails, consider using a cleaner cleaner such as a nail polish remover or a bleach mixture. Hair gel can also work.
3. Make sure the cartridge has time to re-stabilize its internal pressure before attempting to use it. Some cartridges require a plastic squeeze bottle to blow air into the fill hole and increase air pressure. If you just let them sit down, the other cartridges will automatically stabilize after a short time. You should use the ink replenishment kit to receive specific instructions.
4. After the dye sublimation ink has dried, do not delay it for too long to refill the cartridge. The dried ink cartridge will become clogged at the microholes near the exit of the print head. This prevents ink from flowing out and prevents the cartridge from working. If you

Refill Sublimation Printer Ink

refill the cartridge before use, place it in a plastic bag like ziploc to prevent the atmosphere from getting messed up. Opening for as little as 20 minutes may cause the cartridge to dry out and the exit holes to stick, so plan accordingly.
5. Always follow all program instructions that come with the supplemental kit. Don't try to cut any corners or save time on any steps. Refilling the ink is a very tricky and order-based, so just follow the instructions for the letter.
6. When refilling the multicolor cartridge, be very careful not to let any reservoirs overflow or mix. This can result in dirty or muddy prints when you try to use the printer.
7. After completing the refill, don't worry if the ink will leak a little. The exit holes must be open for the cartridge to function properly, so the leakage of ink from these holes only means they are clear and reliable. If it leaks a lot, then of course you will encounter practical problems.
8. Some printer cartridges have a switch on the outside that allows the printer to detect that the cartridge is full and try to use it. When the cartridge begins to dry, the chip is "tripped" and the printer stops using the cartridge. For some ink cartridges (especially Epson), you must reset the chip so that the printer recognizes the cartridge as full and can use it again.
When you install the replacement sublimation transfer ink manually, be careful not to damage the printer and the ink cartridges.

More Info:
Website: www.skyimagepaper.com
Company Name: Fei Yue Digital Technology Co.,LTD
E-mail: sales@feiyuepaper.com
Tel: 86-025-86628894
Whatsapp: +86 15007920742
Address: Central Road 323, Nanjing, Jiangsu, China