Sublimation Transfer Printer-Pay Attention to The Ink Tightness When Using It

If the sublimation transfer printer's running-in ink leaks and ink leaks occur, it will easily cause problems such as ink cut or print disconnection when the photo machine is drawing, which will affect the quality of the drawing. Therefore, in the process of using and maintaining the photo machine, it is necessary to pay attention to the tightness of the ink supply system and the ink circuit of the photo machine.

Sublimation Transfer Printer

Generally, in the printout of a dye sublimation printer, if you find white lines on the image screen, a missing color or a missing ink drop from the ink cartridge when printing, it is recommended that you check the ink supply problems of the related ink supply system and the ink Road tightness.

What is the common phenomenon of printer cartridge leakage? How should we solve it?

During the normal use of the printer, the nozzle is tightly connected with the ink tube and the ink supply cartridge. The siphon principle is used to continuously and continuously supply ink to the nozzle during the printing process of the photo machine to ensure the inkjet printing of the nozzle. The performance of the printer when the air is leaking, for example, the photo machine will not bubble into the print head during the process of printing, the phenomenon of air bubbles flowing backward, the ink accumulation in the nozzle hole is very serious, and the contact zone will be stained with ink. There will be broken ink, etc. These are relatively obvious air leaks related to the poor ink supply of the photo machine. In this case, it may be caused by air leakage of the ink cartridge, or the seal at the elbow interface or the related ink supply tube is broken. Please check the sealing condition of the interface between the ink injection connections, the ink cartridge interface, and the ink bag. You can also remove and reconnect these interface connections to avoid looseness at the interface affecting the sealing of the connection.

 Sublimation Printer

Similarly, the poor sealing of the ink supply pipeline of the digital textile sublimation printer also causes the problem of ink dripping in the photo machine, especially during printing, which directly affects our printing quality. Therefore, in the daily use of the photo machine, we must pay attention to the tightness of the ink supply pipe of the photo machine. To ensure the tightness of the ink supply piping system connection, check the ink storage tube cap and tighten it to ensure that there is no loosening, or reinforce the sealing nozzle and pin connection port to avoid loosening. At the same time, when adding maintenance operations such as adding ink to the photo machine, pay attention to the correct ink filling operation, and follow the ink filling operation instructions provided by the photo machine manufacturer. Pay attention to the standard storage ink volume of the ink cartridge. Generally, the ink capacity is 2/3 of the best. Do not make the ink volume of the ink cartridge full or low.

In addition, during the use of the printer, if you find that the related ink supply tubes, ink cartridges, and ink sacks are leaking, please replace them in time to keep the photo machine at the best-uninterrupted ink supply status at all times. Print out a more perfect picture.

More Info:

Website: http://www.sublimationstar.com/

Company Name: Fei Yue Digital Technology Co., LTD

E-mail: sales@feiyuepaper.com

Tel: 86-025-86628894

Whatsapp: +86 15007920742

Address: Central Road 323, Nanjing, Jiangsu, China

When Buying Dye-Sub Printer, What Should Pay Attention to In Addition to Performance

When you buy a dye-sub printer, you can't just look at its performance. The subsequent use of consumables, after-sales service, and installation training are all that we need to consider. After the buyers and sellers reached a deal, the cooperation relationship between the two parties was not terminated, but the beginning of the cooperation between the two parties.

Dye-Sub Printer

The strength background and brand reputation of sublimation inkjet printer manufacturers must be examined, just like using it with someone, first of all, it depends on his character. The brand's after-sales service is also not to be underestimated. No matter how good or excellent the performance of the photo machine is, faults and later parts are essential. If there is a problem, the manufacturer cannot solve it in a timely manner, which is a waste of time and a normal connection single. Therefore, a brand with a high reputation and a good brand is your best choice, so that consumers have a sense of security because these photo machine manufacturers must have won the trust of many customers in the market. This is also the evaluation they have accumulated over the years. Good channels have been formed in product development, quality, and service. In order to guarantee the services in all aspects in the later period, the purchaser can sign a detailed purchase contract after the payment is completed, so as to use the law to safeguard their rights and interests when necessary.

Sublimation Printer

Finally, remind users who buy large format sublimation printing machines, do not only care about the maximum speed but ignore the standard speed. In fact, the standard speed is the main indicator of the work efficiency of the photo machine, and the maximum speed is not beneficial for future use. Also, when choosing a wide width, you must choose according to the actual situation of your business. For example, if more than half of your usual business is 1.8 meters or more, you can choose a 2-meter device. Of course, if the economic budget allows, you can also choose Wide for future business development.

More Info:

Website: http://www.sublimationstar.com/

Company Name: Fei Yue Digital Technology Co., LTD

E-mail: sales@feiyuepaper.com

Tel: 86-025-86628894

Whatsapp: +86 15007920742

Address: Central Road 323, Nanjing, Jiangsu, China

Digital textile sublimation printing ink-how to reduce the cost of it?

In fact, the digital textile sublimation printing ink is also skillful in use. If it can be combined with equipment maintenance, it can save a lot of maintenance costs and reduce the loss of nozzles, thereby reducing the overall cost.

Digital textile sublimation printing ink

First of all, talk about storage skills: the storage environment of the water-based sublimation ink should be consistent with the use environment. This should be paid more attention to the harsh weather. This is because the equipment and ink requirements are relatively strict in general. In winter and summer, the temperature of the warehouses and workshops of most companies are very different. Therefore, the use of the ink just taken out of the warehouses is often not smooth, and sometimes it does not work properly, which affects the efficiency of work. The best solution, in this case, is to get the ink into the use environment a few hours in advance and wait until the ink temperature reaches the requirements before using.

There is also a bad habit. I don’t know if everyone has it. In order to reduce the

Sublimation ink

working capital, many inkjet manufacturers try to run out of ink before ordering the next batch of ink. This approach reduces the company's operating costs, but it also Brings a disadvantage. This has to be said from the perspective of ink manufacturing because the ink is a chemical product. As we all know, even if the chemical product is perfected and the test is strict, it will inevitably cause batch instability. Because of this, the scale is even larger. Ink manufacturers do not dare to guarantee that each batch of ink produced by them is stable. Therefore, the above-mentioned method is very easy to cause ink cut-off due to a problem with a certain batch of ink that cannot be printed normally, which not only affects production but also easily loses customers. In view of this, the correct approach is to be able to prepare more goods, at least to ensure that the next batch of goods will be delivered. In addition, new shipments should be immediately used on the machine to determine whether the new ink is easy to use. If there is a problem, immediately replace and exchange the new ink. If there is no problem with the new ink, the old ink should be used up first to prevent the old ink from expiration.

Another point is that when we run out of sublimation printer ink, we need to clean the ink path and replace the filter regularly. Many manufacturers do not have the habit of cleaning the ink circuit, which is not desirable. Because the ink pollution is inevitable and unavoidable, only through regular replacement and maintenance to prevent unnecessary damage to the print head.

More Info:
Website: http://www.skyimagepaper.com
Company Name: Fei Yue Digital Technology Co., LTD
E-mail: sales@feiyuepaper.com
Tel: 86-025-86628894
Whatsapp: +86 15007920742
Address: Central Road 323, Nanjing, Jiangsu, China

Advertising digital printer-how to choose high-quality ultra-thin light box and lamp for it

Today, business is developing rapidly, and the promotion and sales of products cannot be separated from advertising digital printer. In daily life, different advertisement displays are everywhere around us. Today we will briefly describe the selection of high-quality light films for photo machines, and the production of light box advertisements will allow better print output.

Advertising digital printer

Light box advertisements are beautiful and generous and have strong advertising effects. They are easy to attract people's attention, so they are also widely used by advertising manufacturers. In the production of light box advertisements, with high-quality light films and high-precision printouts equipped with Wuteng photo machines, a perfect light box advertisement will have perfect effects that you never expected.

In the production of normal digital textile printer light box advertisements, it is also very important to choose high-quality light box lights. However, the quality of ultra-thin light box lights directly affects the life of the light box. Be extra cautious.

First of all, when selecting and purchasing photo light film, pay attention to the material of the light box light film. For the overall material of the light film, it must first be soft, thin, and light-transmissive.

Inkjet printer

The second is the temperature requirements of the light film. In our common light box advertisements, relevant light tubes are placed, and the light is illuminated outward through the light tube so that the picture of the light film is more beautiful and eye-catching. However, the light will generate a certain amount of heat during long-term use, that is, the temperature will be high. Therefore, for high-quality and ultra-thin lamps, we need a certain high-temperature resistance. Under the influence of temperature, the lamp will be deformed or other problems will affect the quality.

In addition, in the process of using the digital printing machine to print the light film and the light box light film, some users asked, what is the reason for the white dots on the surface of the light box installed light film? For this problem, there may be the following reasons: For example, the screen is not completely dry after the printout of the photo machine, there is moisture, or there is an abrasion in the light guide plate. Finally, if the screen is pressed, white spots will appear Phenomenal.

Therefore, when we usually choose light box lights and make light box advertisements, the correct selection of the lights is an important link.


More Info:
Website: http://www.skyimagepaper.com
Company Name: Fei Yue Digital Technology Co.,LTD
E-mail: sales@feiyuepaper.com
Tel: 86-025-86628894
Whatsapp: +86 15007920742
Address: Central Road 323, Nanjing, Jiangsu, China

Is the plug of outdoor photo machine related to the voltage instability?

For outdoor photo machines, nozzle plugging is a common problem. As a large, wide-format inkjet printer, using piezoelectric inkjet technology or thermal foaming technology, the plugging problem will also exist. Today, I want to briefly describe whether the plugging of outdoor photo machines and the instability of the voltage have any effect?

 Outdoor photo machine

When the inkjet printing machine is used to print pictures on a daily basis, the plugging of the photo machine is often found, especially when the photo machine is suspended for a long time and the maintenance of the print head is not done well. But are these failures related to piezoelectricity? The voltage of the photo machine is unstable. Will it cause the photo machine to be blocked frequently? It can be said that there is no direct relationship between the voltage and the nozzle plug, but the unstable voltage easily burns the nozzle circuit, such as the damage of the mainboard, and it may also cause the nozzle circuit damage. If the voltage of the photo machine is unstable, it is recommended that the user install a voltage stabilizer for the photo machine, and it must be installed in order to better protect the print head.

Digital printer

Therefore, the unstable voltage of digital textile printer will not block the head, but it will lead to a drastic reduction in the life of the nozzle, and even directly burn the nozzle, especially the thermal foam photo machine. However, whether it is a thermal foam photo machine or the latest piezoelectric technology piezoelectric photo machine, it is still recommended to install a voltage stabilizer for the photo machine, and the sooner it is used, the safer it will be. Adding a stabilizer is not expensive, and if the nozzle is damaged due to unstable voltage, it will be worth it. The thermal foaming nozzle is okay, and its price is not expensive, but if the nozzle is often damaged due to voltage problems, it is also a headache. As for the piezoelectric photo machine, let alone this, the piezoelectric photo machine uses Epson's piezoelectric nozzle, which is the core component of the photo machine, and its quality is critical to the photo machine.


More Info:
Website: http://www.skyimagepaper.com
Company Name: Fei Yue Digital Technology Co.,LTD
E-mail: sales@feiyuepaper.com
Tel: 86-025-86628894
Whatsapp: +86 15007920742
Address: Central Road 323, Nanjing, Jiangsu, China

Large format digital printer-how to maintain image accuracy in its output

In order to obtain high-quality output effects in the large format digital printer color output, we must pay attention to the source file quality. There are two main ways to obtain the source file. One is obtained by scanning the material. At this time, the performance of the scanning device has a decisive influence on the quality of the generated file. The quality of the file obtained by scanning the same material on different devices is different. Another method to obtain the original image is to directly select it from the ready-made electronic picture library. At this time, the user cannot select the accuracy of the source image.

Large format digital printer

In theory, the file accuracy of the source digital inkjet printer image should be no less than 1/4 of the output accuracy in the case of 1: 1. For example, if a 10X10cm photo is to be enlarged to 100X100cm and output at 720dpi, the photo should be scanned at a resolution of not less than 1800dpi (calculation formula: source file dpi = magnification factor X (output dpi / 4)). If the accuracy of the source file is less than 1/4, the image will appear more grainy and affect the picture quality. If it is too large, the file will be too large, which will affect the drawing speed. In actual use, users often encounter such a problem. When scanning a photo, the accuracy of scanning needs to exceed the mechanical resolution of the scanner. At this time, the user only needs to scan the entire photo with the highest mechanical resolution of the scanner, instead of using the scanner's software interpolation function to improve the file accuracy. If the RIP software has anti-aliasing, it is best to turn it on. Example: 10X10cm photos need to be scanned at 1800dpi, and the scanner's mechanical resolution is 600dpi. The scan should be performed at 600dpi, so the scanned file is much smaller. On this basis, the image processing speed is much faster than the processing of 1800dpi images. You can increase the file accuracy before adding text or printing output. To get better scanning results, higher quality material is required. The order of scan quality of different types of materials is color positives, photos, and prints. For color negatives, it is best not to use it for non-professionals because it involves color reproduction. Among them, prints are the most common. The key to scanning prints is to choose the parameters for going to the screen. Users can first compare different parts of the material with different parameters to find the best parameters.

 Inkjet printer

Note: The optical resolution of a scanner refers to the accuracy of the optical components in the scanner. Mechanical resolution refers to the accuracy of the scanner's mechanical movement, similar to hardware interpolation. Software resolution refers to the resolution that the scanning program can achieve using interpolation algorithms.

Our company provides all kinds of digital printing machines, such as sublimation printers, eco-solvent printers, UV printers, 1.8m, 2m, 3.2m wide, which can be equipped with different Epson print heads. If you have any needs, please feel free to contact me or leave me a message below the post.


More Info:
Website: www.skyimagepaper.com
Company Name: Fei Yue Digital Technology Co.,LTD
E-mail: sales@feiyuepaper.com
Tel: 86-025-86628894
Whatsapp: +86 15007920742
Address: Central Road 323, Nanjing, Jiangsu, China

The processing steps of piezo photo machine doesn't respond after turning on

Nothing happens when the piezo photo machine is turned on, and all the indicators are off. What should I do? How can this be done? I collected and sorted out some reasons and shared them for your reference.

As there are many brands of inkjet printing machines, the causes are also different. In this case, we should first check whether the circuit is normal and then check whether the components are damaged.

 Piezo photo machine

1. First, check whether the power cord and socket of the machine are damaged or plugged in.

2. If all the above reasons have been ruled out, it is that the power board is broken.
Unfortunately, there is only one last reason. If the power board is broken, we generally can not repair it, it is suggested to contact the photo machine factory or agents to help solve it. Because there are so many other components on the power board, it's hard to know exactly what's wrong, or more will be damaged.

3. Check whether the machine power switch is damaged or out of order.

Inkjet printer

4. Paper cannot be detected: check the print loading item of the auxiliary function in the software menu to see if the paper can be detected. Reload the paper, and the machine with the display will prompt a paper-related warning. When the printer can not sense the paper will not continue to print the task, we need to check whether the paper is good, if necessary to re-test the paper.

5. Print port: we need to check if the IP addresses are consistent.

Network printing needs to unify the IP address, digital printer commonly used port USB is more, when changing the interface needs to adjust the corresponding Settings to normal use.

6. Computer system: some people say why you can print in the first place? This is also the case when computer systems are incompatible because incompatible conditions can cause the machine to be either normal or abnormal. It is recommended to reinstall the system or replace the computer.


More Info:
Website: www.skyimagepaper.com
Company Name: Fei Yue Digital Technology Co.,LTD
E-mail: sales@feiyuepaper.com
Tel: 86-025-86628894
Whatsapp: +86 15007920742
Address: Central Road 323, Nanjing, Jiangsu, China

The large format inkjet printing machine-how to clean its internal dust

A large-format inkjet printing machine has been in use for a year, and there is a lot of dust in it. I am afraid that it will cause many failures to the printer. I want to erase the dust. How can I remove the dust? What to pay attention to?

 Large-format inkjet printing machine

First, open the cover of the digital textile printer and use a clean, soft, damp cloth to remove dust, smudges, ink stains, and shreds from the inside of the printer. If the dust is too much, it will cause poor lubrication of the carriage guide shaft, which will hinder the movement of the print head during printing. You can use a degreased cotton swab to wipe off the dust and oil on the guide shaft and replenish better fluid lubricants, such as sewing machine oil.

Pay attention to the following points when cleaning the inside of the inkjet printer:

1. To wipe the gear, do not wipe the area near the print head and the ink cartridge.

2. In general, do not move the print head. In particular, the print head of some printers is mechanically locked, and the print head cannot be moved by hand. If the print head is forcibly moved, the mechanical part of the printer will be damaged.

Digital printer

3. Do not use any paper products to clean the inside of the digital printing machine, so as to avoid leaving paper scraps in the printer.

4. Do not use volatile liquids (such as thinner, gasoline, spray-type chemical cleaners) to clean the printer, so as not to damage the printer surface.

Our company provides sublimation printers, eco-solvent printers, UV printers, 1.8m, 2m, 3.2m wide, which can be equipped with different Epson print heads. If you have any needs, please feel free to contact me or leave me a message below the post.


More Info:
Website: www.skyimagepaper.com
Company Name: Fei Yue Digital Technology Co.,LTD
E-mail: sales@feiyuepaper.com
Tel: 86-025-86628894
Whatsapp: +86 15007920742
Address: Central Road 323, Nanjing, Jiangsu, China

Tarpaulin digital printer -common problems and solutions for two continuous systems of it

The ink supply methods of tarpaulin digital printers are not all uniform, but most of them are currently used for continuous ink supply systems. Then as a photo machine needs to be maintained, and this continuous ink supply system should also be well maintained to really ensure the print quality of the photo machine.

Tarpaulin digital printer

1. Regardless of the ink supply method, the ink tube is a key maintenance object, and the supply system is no exception. In order to ensure the normal ink supply, we need to check the ink inlets of the ink cartridges inside and outside the ink duct, the ink ducts, and the air filters of the outer cartridges to prevent the ink ducts from entering the air or being blocked. If there is a blockage, you can use a syringe needle to clear the ink outlet. If there is air, you can also extract air by this method.

 Eco-solvent printer

2. Sometimes there will be some bubbles in the ink cartridge of banner eco-solvent printer. Do not underestimate these bubbles. These bubbles can cause problems such as disconnection and lack of color in photo printing. At this time, we need to eliminate the foam before it can be used normally. The specific operation can be completed with a syringe. Take out the inner cartridge first, and use a syringe to pull out the ink in the cartridge. Remember not to rush out at this time, but to slowly pull out. The process at this time is that the ink from the outer cartridge will flow into the inner cartridge, and the ink from the inner cartridge will enter the syringe. After the syringe tube has been filled with ink, the ink in the tube, such as the outer cartridge, is repeated until the ink is free of bubbles.

The continuous supply system is also an important part of the eco-solvent printing machine. When the photo machine is usually maintained, remember to do all aspects of maintenance to ensure that the photo machine has a longer life!


More Info:
Website: http://www.sublimationstar.com
Company Name: Fei Yue Digital Technology Co., LTD
E-mail: sales@feiyuepaper.com
Tel: 86-025-86628894
Whatsapp: +86 15007920742
Address: Central Road 323, Nanjing, Jiangsu, China

Digital photo printer-how to correctly use the ink damper of it

Extensive application of digital photo printers, becoming the mainstream printing device for advertising inkjet printing. High-speed printing with stable performance is more welcomed by users. These high-quality stable performance can not be separated from the close cooperation of the small and large parts of the piezoelectric photo machine to play its important role.

 Digital photo printer

Among the accessories of these piezoelectric inkjet printing machines, there are core accessories, such as our common piezoelectric nozzles, etc., its functions are not described in detail here. What we want to share today is the common gadgets in the piezoelectric photo machine-photo machine ink sacs, these are our common and need to be replaced frequently. These small accessories that we often need and need to be replaced frequently. The correct use of the ink sac can check your photo machine, and the photo machine is better protected and used.

I believe that many users will observe that on the small frame of the photo machine, above the print head, there is a row of small transparent plastic bags connected between the print head and the ink tube. This is the ink sac of the photo machine, usually 4 groups of 8. For example, 8 domestic printers are installed in the printer, and the size is about 5cmx5cm. It is a translucent body with a half bag of ink inside and a filter inside. Its function is mainly used for filtering. The impurities brought by the ink reduce the probability of nozzles and clogging.

 Inkjet printer

The printer ink bag can better control the use of the digital textile printer, filter the ink, and avoid the impurities generated by the ink from blocking the nozzle. At the same time, it can deliver smoother ink to the print head of the photo machine, make the print head work better, and take the printout of the photo machine more beautiful and the color better. However, we need to replace the ink sac from time to time, otherwise, the probability of nozzle clogging is likely to be caused, because too many impurities in the filter or the ink sac without ink will cause the nozzle to be blocked. In the daily use and maintenance of photo machines, the ink sac is also a common replacement accessory. It also belongs to over-ink parts and wearing parts. Its price is relatively low, so frequent replacement will not cause excessive costs. Regular replacement Ink sacs can better protect the photo machine.


More Info:
Website: http://www.sublimationstar.com
Company Name: Fei Yue Digital Technology Co., LTD
E-mail: sales@feiyuepaper.com
Tel: 86-025-86628894
Whatsapp: +86 15007920742
Address: Central Road 323, Nanjing, Jiangsu, China

Photo printer-ambient temperature and cleaning method affect the life of its nozzle

The viscosity index of the ink will change with the change of the ambient temperature, and the corresponding working voltage of the corresponding photo printer nozzle will change accordingly. Otherwise, the injection of the nozzle will be unstable, and the phenomenon of disconnection and ink breakage will occur easily. When the temperature is high, the viscosity of the ink is lowered. At this time, the working voltage of the nozzle should be appropriately reduced. Otherwise, it is easy to form a bubble inside the ink tube, causing no ink to be ejected from the nozzle, resulting in a white line of the screen. Conversely, when the temperature is low, the viscosity of the ink will increase. If the working voltage of the nozzle is not adjusted, the ink will accumulate inside the ink tube. In a short time, it may be seen as a virtual spray. After a long time, the nozzle is easily irreversible. Damage, serious damage to the nozzle hole. The nozzle works from the beginning, the temperature of the nozzle plate is relatively low, but with the continuous operation of the piezoelectric ceramic, the temperature inside the nozzle plate will gradually increase, and as the ink is continuously ejected, part of the heat will be taken out. Finally, the working temperature of the nozzle will be constant at a fixed range. If you start from the beginning of the nozzle to the constant temperature stage, you need to adjust the nozzle voltage according to the nozzle plate or the ink temperature to ensure the normal operation of the nozzle. Otherwise, the nozzle will be unstable.

 Photo printer

For the processing of the digital textile printer nozzle not printing, in the actual printing process, the width of the screen often appears to be smaller than the design width of the nozzle, then the portion of the nozzle that does not come out will not be inkjet. If the ink is sprayed, it will cause a large amount of ink residue to be transported. If the cleaning is not clean, the belt life will be reduced. In addition, because of the interval between the nozzle and the belt, the small ink droplets ejected will drift around with the airflow, flying around the nozzle, and even the control circuit on the nozzle, affecting the normal operation of the circuit part, and being inhaled by the staff is also a great hazard. For this reason, the excess nozzle will not work. If the excess nozzle does not work, the ink in the nozzle nozzle and the ink on the nozzle surface will inevitably cause the ink to dry on the nozzle pipe and the nozzle surface due to volatilization, and the nozzle is blocked. Normally, the nozzle should be cleaned at regular intervals so that the ink in the nozzle tube is in a flowing state.

 Inkjet printer

The effect of the cleaning method on the nozzle. When the ink is ejected normally, the ejected ink droplets will have satellite points, and the satellite dots will adhere to the nozzle surface. As the printing time increases, the satellite dots will increase, thereby forming ink beads on the surface of the nozzle film. If there is damage near the nozzle hole of the nozzle plate, it is not conducive to the diffusion of the ink beads, it will accumulate around the nozzle hole, causing the nozzle hole to be temporarily blocked, and no ink is ejected; if it is not cleaned in time, or the cleaning is not complete, it is possible Causes the ink to dry on the surface of the mouth, speeding up the blockage of the nozzle orifice. In addition, because the cleaning method is not correct, or the cleaning material is incorrectly selected, the nozzle film may be scratched, and the nozzle may be scratched, as if the water is discharged from the faucet. If the water outlet of the faucet is damaged, then The water flow coming out is not under direct current, but is biased out. The same is true for the nozzle inkjet water. Once the nozzle hole is destroyed, it will directly cause irreversible damage to the nozzle. After the nozzle hole is destroyed, the ink around the nozzle hole is more likely to accumulate ink, block the nozzle hole, and shorten the service life of the nozzle. In addition, it also causes oblique spray, which reduces the print quality of the screen.

From the application of the industry, the nozzle of large format digital printing machine manufacturers must have targeted development, in order to better adapt to the industry applications, equipment manufacturers must also have a wealth of nozzle experience, to ensure the cooperation of nozzles and ink, professional manufacturers can provide complete nozzles Maintenance program to extend the life of the nozzle.


More Info:
Website: http://www.sublimationstar.com
Company Name: Fei Yue Digital Technology Co.,LTD
E-mail: sales@feiyuepaper.com
Tel: 86-025-86628894
Whatsapp: +86 15007920742
Address: Central Road 323, Nanjing, Jiangsu, China

Textile printer is garbled or fan does not turn, what should we do?

In recent days, I have seen a lot of people rushing to ask questions about the failure of the textile printer, mainly because of the garbled phenomenon of the photo machine and the fact that the fan of the printer does not turn. Today, I have probably sorted out some related solutions for your reference. I hope I can bring you some help.

There are two main situations in the garbled version of the inkjet printing machine: one is that the photo machine is garbled, that is, the image that is printed is completely inconsistent with the original image, and the deviation is very large. Another situation is that the display of the photo machine is garbled.

 Textile printer

If the printer is garbled, it can be solved according to the following conditions. First, if the real machine uses a parallel port print line, make sure that the parallel port mode of the computer is ECP. If the mode is correct, check if the data cable or the print cable is normal. If there is any problem, please replace it in time. In addition, there may be a problem with paper feeding. Check if the paper is normal and whether the paper is correct. If these are normal, it may be that the computer software or the system has failed. You can reinstall the Montevideo software or replace the computer and test it. If it still doesn't work, then there may be a problem with the motherboard of the photo machine, so you need to replace it in time.

Another situation is the problem that the photo display is garbled. First of all, please pay attention to whether it is in English. If this is not the case, please check the static electricity or ground connection, or the plug on the screen and the motherboard are not plugged in, just plug it in again. You can also use alcohol to wipe the memory and decryption cards to improve the situation. If it doesn't work, it's probably a display problem, and you need to change the display in time.

 Digital printer

Finally, let's talk about the fan problem of digital inkjet printer. Generally, there is a problem with the connection. You can re-plug it or change the root line. It may also be a problem with the socket. Put the fan in another slot and test it. If it can be used normally, it proves that there is a problem with the socket. Of course, if it can't rotate normally, most of the fan is broken, you need to replace it. In some cases, the fan is faulty due to the motherboard problem. It is best to ask the technician to check it and determine if the motherboard needs to be replaced.

For the time being, I have summed up so much for everyone. I hope that I can help you. I also remind everyone to be careful when using it, so as to avoid unnecessary problems and affect work efficiency.

More Info:
Website: http://www.skyimagepaper.com
Company Name: Fei Yue Digital Technology Co.,LTD
E-mail: sales@feiyuepaper.com
Tel: 86-025-86628894
Whatsapp: +86 15007920742
Address: Central Road 323, Nanjing, Jiangsu, China

Digital printer printing speed is slower after system is modified,how to do?

I believe everyone knows that the continuous ink supply system used in digital printers on the market is also a common trend. The development of the continuous supply system is relatively mature. The most important use is convenient and fast, which can greatly improve the work efficiency of the photo machine, thus deeply welcomed. However, some users also directly modify the continuous ink supply system, so there is a situation in which the printing speed is reduced after the system is modified. I also want to know that it was originally intended to improve the efficiency of work, but it was not enough to lose the result. Let me share with you today the solution to this situation, I hope to help you make up for this advantage.

 Digital printer

Generally speaking, when the continuous ink supply system of digital inkjet printer is modified, the original ink cartridge will be modified. In this case, it will inevitably
burden the word car. When the load is too heavy, the car will run slowly, and the overload will lead to accelerated aging of the photo machine and increase the friction between the car and the connecting rod, resulting in a lower working speed. The car could not be reset and could not be used completely.

To solve this situation, there are the following methods:

The first is to replace the motor. When the hose of the continuous ink supply system rubs against the wall of the printer, the load of the electric motor will gradually increase. This will cause the loss of the motor for a long time, so it needs to be replaced. The second is to lubricate the connecting rod. Sometimes low-speed printing is because the use time is longer, the friction between the carriage and the connecting rod inside the machine becomes larger, and the increase in resistance causes the electric motor to run slowly, so that the lubrication of the connecting rod can solve the fault. Finally, pay attention to the aging of the belt of the printing equipment. The frictional force of the driven gear connected to the motor accelerates the aging of the belt of the printer. At this time, the cleaning and lubricating machine can avoid the failure of the belt aging.

 Inkjet printer

It is worth noting that you should be careful to connect the wires of large format digital printing machine, and do not cause the pulling of the car to be blocked. Since the internal structure of different photo machines is somewhat different, and there is no support for modification and supply, it is crucial that the wiring problem becomes a modification. I hope these methods can bring you some reference!


More Info:
Website: http://www.sublimationstar.com
Company Name: Fei Yue Digital Technology Co.,LTD
E-mail: sales@feiyuepaper.com
Tel: 86-025-86628894
Whatsapp: +86 15007920742
Address: Central Road 323, Nanjing, Jiangsu, China

The roller heat press machine-do you know how it is pressurized?

The installation of the multi-function roller heat press machine is divided into a lining cloth and a white cloth. The lining cloth adopts a tight type, and the white cloth is mostly loose, and is fed by super-feeding, so that the fabric is suspended in the shape of the cloth ring, and the speed of feeding the super-feeding roller is controlled by the photoelectric tube to ensure the white cloth is relaxed. The state enters the front of the car, making the fabric tension different and achieving excellent printing results. The lining-free printing machine only has a white cloth installed in the cloth.

 Roller heat press machine

Pressing mechanism of the garment rotary heat transfer machine: the pressing mechanism applies pressure to the flower cylinder through the bearings at both ends of the flower cylinder shaft. In order to make the printed pattern clear, the left and right prints are averaged, and the pressure must be applied properly. The pressure is too light, and the printed pattern is light in color, so that the bottom is too thick, it will be ambiguous, and it will additionally increase the power loss and increase the wear of the parts. Usually, the thick-lined, large-patterned flower cylinder and the pressure roller as a light plate are lightly pressed, and the flower tubes of fine lines, clouds, and snowflakes are heavily pressed.

The line pressure ranges from 100 to 600 N/cm and is commonly used from 200 to 400 N/cm. The total pressure of each flower tube can reach 2 × 104 - 8 × 104N depending on the length of the flower tube.

In addition, the pressurization mechanism should also meet the following process and operational requirements:

 Heat transfer machine

1. The calender heat press can not only control the advance and retreat of the flower tube and the bearing seat, but also precisely adjust the pressure on the left and right sides respectively.
2. The pressurizing system should be flexible. When the joint of the cloth passes through the pressing point or the shaft is bent, it can act as a buffer to reduce the pressure passively.


More Info:
Website: http://www.sublimationstar.com
Company Name: Fei Yue Digital Technology Co.,LTD
E-mail: sales@feiyuepaper.com
Tel: 86-025-86628894
Whatsapp: +86 15007920742
Address: Central Road 323, Nanjing, Jiangsu, China

Digital inkjet printer-how to use and maintain its ink supply tube

The printing ink supply tube of digital inkjet printer is the connection channel between the printing nozzle and the ink supply cartridge. Usually, the photo machine consists of a total of 8 ink tubes in a row, which is responsible for conveying ink to the nozzle. Don't look at a small plastic tube, its role is very important, such as printing ink breaks in the common fault of the photo machine, the ink supply is not on, the ink tube leaks, small holes, cracks, blockage, etc. Wait, it will directly affect the normal print job of the photo machine.

 Digital Inkjet Printer

First of all, the ink tube of wide format textile printer should have high corrosion resistance, so the material selected for the ink supply tube must have strong corrosion resistance and toughness. It is undoubted that the ink supply tube of the photo machine needs toughness. If there is no toughness, it will not be able to withstand such a range when it needs to move back and forth. For example, the portion of the ink tube connected to the nozzle needs an unrestricted high-speed back and forth movement, which may cause the ink tube to rupture ink ejecting, leaking gas, etc., and the chain reaction may cause catastrophic consequences of the scrapping of the entire photo machine. Therefore, many photo machine manufacturers in the process of the arrangement of the ink tube of the machine, in order to better protect the toughness of the ink tube, the tank chain-type drag chain is installed on the outer layer of the ink tube, which can effectively protect the ink tube printing process in the printer. The frequent coming and coming movements cause damage to the ink tubes. In addition, the corrosion resistance of the ink tube is also important. If the ink tube cannot resist the pollution of the ink, then every part of the ink tube will not be safe in the ink supply process, and even the entire ink tube will leak due to corrosion. In the case, the hazard is even greater than the lack of toughness.

 Digital Printer

In addition to the selection of the ink tube, usually pay attention to the maintenance work in the use of the inkjet printing machine, do not disassemble the ink tube, pay attention to the tightness of the ink tube and the joint. Pay attention to check the integrity and patency of the ink tube. Do not let other inks precipitate or other impurities cause the ink to solidify and block the ink supply tube.

Therefore, the use and maintenance of the ink supply tube of the photo machine is very important, and the user of the photo machine must pay attention to it.


More Info:
Website: http://www.sublimationstar.com
Company Name: Fei Yue Digital Technology Co.,LTD
E-mail: sales@feiyuepaper.com
Tel: 86-025-86628894
Whatsapp: +86 15007920742
Address: Central Road 323, Nanjing, Jiangsu, China

How to choose calender heat transfer diameter and thickness of the drum

The rollers of calender heat transfer in the drum line are mostly cylindrical parts and are usually divided into drive and moving rolls. Suitable for rotary screen printing machines, digital printers and other conveying equipment. So how do you choose the diameter and thickness of the drum line? Let me give you a brief explanation:

 Calender Heat Transfer

After the drum is formed, it is generally surface treated, and some are painted, galvanized, rubberized, chrome-plated. According to the size, it can be divided into large-sized mechanical drums, the length can reach more than 10 meters, the diameter can reach more than 1500MM, and the small flat rollers like the belt conveyor on the automatic assembly line, the length is generally 1 meter. Within, the diameter is between 159MM.

The roller diameter of sublimation heat press transfer machine selection range: 25mm, 2mm, 38mm, 42mm, 50mm, 57mm, 60mm, 76mm, 80mm, 89mm. The principle of determining the diameter of the drum is that when the tensile stress of the conveyor belt is large, the additional bending force should be smaller, whereas when the bending force is large, the tensile stress is smaller, and a smaller roller can be selected.

 Rotary Heat Transfer Machine

The calculation of the thickness for the roller heat press machine's drum usually depends on the diameter of the drum, the length of the cylinder, and the tension of the transport tape and the wear during braking. Therefore, the calculation of the thickness of the drum is difficult, and the calculated value is small, and the wear and the ease of manufacture are also considered, so the thickness of the cylinder is usually selected to be thick. After determining the thickness of the shell, we need to check the strength of the shell, but because the shell is subjected to normal and tangential loads, and the size of the load will vary along the circumference of the drum. Therefore, there is no accurate calculation method for the calculation of the thickness of the roller line drum. Although the finite element calculation can relatively accurately calculate the results, there is still a lack of a common procedure for the calculation of the conveyor roller, and only the finite element of the individual drum can be performed. Analysis, but can not analyze the calculation of the roller line drum.


More Info:
Website: http://www.skyimagepaper.com
Company Name: Fei Yue Digital Technology Co.,LTD
E-mail: sales@feiyuepaper.com
Tel: 86-025-86628894
Whatsapp: +86 15007920742
Address: Central Road 323, Nanjing, Jiangsu, China

What effect does dispersed sublimation ink viscosity have on the print head?

The most direct effect of the increase in dispersed sublimation ink viscosity of the printer is the flow of ink in the tubing, which causes the ink to break. The change of viscosity indirectly affects the surface tension of the ink. The surface tension of the liquid is the attraction between the molecules inside the liquid and the molecules on the surface of the liquid. When the viscosity increases, the shear resistance between the molecules and the molecules increases. It also indirectly affects the surface tension of the liquid. At the moment when the ink droplets leave the ink head, if the tension is too large, the ink droplets will not be ejected, and ink droplets will remain on the surface of the nozzle, resulting in non-particle plugging.Another characteristic of the composite solution is that the solubility of the composite solution is relatively low at low temperatures, and some solute is often present.

 Dispersed Sublimation Ink

If the dye sublimation ink appears to be precipitated, the precipitated material may also cause the ink bag and the ink head to become clogged. The most direct factor in the above cases is the temperature, which also affects the adhesion between the ink and the medium. Increasing the room temperature is critical to the stability of the ink during printing.

The same ink, the temperature is lowered, the viscosity will become larger, the viscosity is too large, and it is prone to "broken wire" at high speed printing. Many inkjet printer users will think that the nozzle is blocked, but once cleaned, it will be normal immediately. It will not repeat for a long time, and some customers will think it is a problem of ink quality. This is followed by the problem of ink absorption and drying. If the temperature is too low, it is not conducive to the absorption of ink by the inkjet coating, and it is not conducive to the evaporation of the solvent of the ink, resulting in "stacking" phenomenon. Therefore, the majority of users should maintain a suitable temperature when using in cold weather, which is conducive to the normal operation of the printer.

Dye Sublimation Ink

Under the influence of temperature, the thinness of the ink changes, which is a physical phenomenon, but the change is the form, and its essence is not changed.

The inkjet sublimation printer ink becomes thicker and the viscosity becomes larger. However, it is recommended not to use thinner or varnish to pour into the ink to reconcile and change its consistency. Because when users use these additives to adjust the ink, you do not know the total amount of additives that can be accommodated by the ink. It is easy to exceed the amount, which will affect the performance of the ink and affect the print quality.

More Info:
Website: http://www.sublimationstar.com
Company Name: Fei Yue Digital Technology Co.,LTD
E-mail: sales@feiyuepaper.com
Tel: 86-025-86628894
Whatsapp: +86 15007920742
Address: Central Road 323, Nanjing, Jiangsu, China

Digital printing machine-the sequence steps to properly check printer nozzle failures

As we all know, the nozzle is the core of the digital printing machine, so its value is also very expensive. How to check and eliminate the failure of the printer nozzle?

 Digital Printing Machine

When we are using the inkjet printing machine, if the nozzle can't discharge the ink, don't think about changing the nozzle first. Check it carefully to make sure that the nozzle is burnt, don't blindly replace the nozzle, and waste money. There are many factors that may cause the nozzle to fail to ink. Just a simple check, we can determine the actual situation of the nozzle of the printing machine.

First of all, when the nozzle does not discharge ink, first remove the nozzle, be careful when removing the nozzle, do not scratch the surface of the nozzle. After removing the nozzle, you can use a paper towel or towel without dander to gently touch the surface of the nozzle to see if there is any ink oozing. If there is no ink oozing out, the nozzle is internally clogged, and the nozzle can be re-cleaned. It may also be caused by a problem with the raster of the photo machine or the poor deformation of the small frame. At this time, it is only necessary to determine the cause of the problem. Normal repair or replacement of the accessories is sufficient.

 Inkjet Printer

If the above methods can not eliminate the problem of the nozzle, we can first check the other accessories of the photo machine, first check if the ink in the ink cartridge is insufficient, whether the ink tube is leaking or damaged. Also, check if the ink damper is damaged. If there is no problem with the photo machine accessories, the user can clean the nozzle multiple times, then increase the print accuracy mode, and then print the test to see if it can print normally. If it can print normally, it means that some nozzles are damaged, but it can be used normally if it is printed in high-precision mode. If it still cannot be printed normally, it means that all the nozzles of a certain color are burnt out and cannot be used any more, then it needs to be replaced.

The nozzle is the core of the large format digital printer, so its value is also very expensive. Please refer to the above suggestions when there is a problem with the photo machine nozzle.

More Info:
Website: http://www.sublimationstar.com
Company Name: Fei Yue Digital Technology Co.,LTD
E-mail: sales@feiyuepaper.com
Tel: 86-025-86628894
Whatsapp: +86 15007920742
Address: Central Road 323, Nanjing, Jiangsu, China

Printing ink-how to check quality to judge whether it is inferior ink

 Printing Ink

It is well known that the use of inferior printing inks is very harmful to the nozzle. Burning the printer nozzle not only affects the printing results but also increases operating costs and damage to the printer equipment. The cheapest to buy a photo machine is thousands, expensive tens of thousands or even hundreds of thousands. If you bought a cheap inferior ink, it may be caused serious damage to the equipment, it is really worth the loss. Therefore, to remind the majority of photo machine users, we must buy regular factory ink or use the original ink of the printing machine. How to distinguish the quality of ink?  Here is a brief introduction to how to distinguish the quality of ink.

The method of distinguishing ink quality:

1. With a matchstick soaked incompatible printer ink, the line is uninterrupted on the paper. The finer the line, the more broken the line, the darker the ink, the better the quality.
2. You can use the inkjet printing machine to print some grid and thin lines. If there is a color cast or short line, it is good to show that the ink quality is poor. Of course, it is necessary to clean the nozzle before printing to ensure that it is not the fault caused by the machine so that it can be tested most accurately. However, this method is used to waste ink. Secondly, if the printer ink quality is poor, the nozzle should be re-cleaned, so this is not the best method.

 Printer Ink

3. Actual print inspection, first add the inkjet ink to the empty ink cartridge as required (the ink cartridge electrode must be good). Then install the ink cartridge with the ink to perform inkjet cleaning to see if the self-test printing is normal (if the self-test is not passed, it is necessary to immediately clean the improper ink and change the ink). Next, use WORD to typeset, set the back background of various 0 fonts and "screen". Finally, the printing test is carried out on paper by the LQ model/HQ printing method, and good ink should have no problems such as the lack of pen drawing and color cast.

Therefore, remind the majority of users of inkjet photo machine, must buy regular factory ink or use original ink.

More Info:
Website: http://www.sublimationstar.com
Company Name: Fei Yue Digital Technology Co.,LTD
E-mail: sales@feiyuepaper.com
Tel: 86-025-86628894
Whatsapp: +86 15007920742
Address: Central Road 323, Nanjing, Jiangsu, China