How to maintain large format digital inkjet printers when they stop working

If the large format digital inkjet printer is stopped for a long time, be sure to pay attention to the maintenance work of the nozzle, so as to ensure that the re-enablement after the holiday can quickly restore the normal use of the digital printer and maintain the high quality print output, and avoid the digital printer not being used for a long time. The nozzle is clogged, and the associated ink supply system is fluent and the machine equipment is malfunctioning.

 Large Format Digital Inkjet Printer

Therefore, before the holiday time, you should do the relevant pre-suspension maintenance of the digital inkjet printer, such as cleaning and moisturizing the nozzle, or if necessary, remove the nozzle to clean and wrap it, package it, and clean and place the surface of the digital printer. Dust-proof, disconnect the relevant power supply of the digital printer, close the relevant digital printer casing and place it well, pay attention to the environment to prevent rat damage. These are all good maintenance work after the digital printer is stopped before the fake.
In order to better maintain the digital printer, if the digital printer is not used for a long time, the following maintenance should be carried out on the digital printer and the piezoelectric nozzle to prevent the nozzle from being clogged and other related digital printers from malfunctioning.
First of all, according to the length of the holiday time, the wide format digital printer normal shutdown of the time is not long, you can power off, the time is too long (outdoors more than 4 days in the house for more than 8 days, experienced can also decide according to their own experience) to remove the nozzle, Store it. First remove the nozzle, remember that the nozzle mirror (ink ejection surface) does not touch anything. When removing, first remove the ink bag, then remove the ink bag holder, then remove the three screws of the fixed nozzle, then take the nozzle out smoothly and remove the two data lines. Pay attention to the ink when removing it. Do not put the ink on the top of the nozzle for the next cleaning. (As shown below) After removing the nozzle, ensure that the cleaning solution is not

Digital Printing Machine

contaminated by dust (oily cleaning solution for outdoor nozzle, water-based cleaning solution for indoor nozzle), and clean the supplied syringe. (Note the inside of the glass syringe.) Do not have impurities). Comes with a silicone tube with a length of ten centimeters. Please pay attention to ensure that there are no impurities inside the tube before use. Be careful to block the nozzle.
When cleaning, connect the silicone tube to the syringe, draw the cleaning solution into the syringe, and connect the other end of the tube to the eight ink-injecting columns of the nozzle one by one, then gently push the cleaning solution into the nozzle, and then the cleaning solution from the nozzle. Below the mirror nozzle, please note: (Do not use too much force to avoid damage to the nozzle) Please pay attention to the following points when cleaning:
1. During the cleaning process, be careful not to flow the cleaning solution into the data line chip of the plug nozzle, and tilt the other end as much as possible to avoid the inflow of the cleaning solution.
2. Pushing the syringe too hard during cleaning will cause the tube connected to the nozzle to spring open. When cleaning, press the nozzle and silicone tube connection to avoid unnecessary trouble.
3. After cleaning, the mirror surface will have residual ink on the bottom of the nozzle. You can use a clean container to pour the cleaning solution into the container (the oily cleaning solution is corrosive, be careful that the container will be perforated and leak), soak the mirror surface of the nozzle in the cleaning solution. (Note: just immerse the mirror in the inside, the other parts do not need to be soaked, but the mirror surface should not be in contact with the bottom of the container, only the immersion time in the cleaning solution can be immersed in the cleaning solution for about 1--2 hours.)

Inkjet Digital Printer

4. After the soaking, remove the nozzle and wipe off the residual cleaning solution and ink of all parts except the mirror surface. Pay attention to the mirror surface. After cleaning, you can use a plastic wrap to seal it (if you have a moisturizing solution, please inject it into the moisturizing liquid). Do not entangle it when wrapping. Do not bump the mirror after wrapping. When storing, the nozzle should be placed obliquely. Do not directly place the mirror on the table.
Note: There is also a simple method for using the cleaning solution as ink, and continuously pumping ink until the ink path and the nozzle are cleaned.
It is vital to maintain your digital printing machine in daily life.

More Info:
Website: www.skyimagepaper.com
Company Name: Fei Yue Digital Technology Co.,LTD
E-mail: sales@feiyuepaper.com
Tel: 86-025-86628894
Whatsapp: +86 15007920742
Address: Central Road 323, Nanjing, Jiangsu, China