Photo sublimating printer, check whether the ink is excessive to avoid throw ink.

When using a photo sublimation printer, you often encounter a machine that burns the nozzle. Below and analyze the reason why the photo burner is sprayed and how to avoid it:

Photo Sublimating Printer

First, the sublimation printing machine that protects the nozzle is mainly the choice of ground wire. The ground wire must be connected. The best way to connect is to pick up the computer and connect it with the computer. The selected line is preferably a copper wire of more than four squares. In addition, it is mainly to observe the contact position of the nozzle and the contact tape to see if there is ink penetration. It is best to take the nozzle out when looking at the machine. Don't put too much ink, too much is easy to smear, too little is not good, it is best to 25 to 30 ml.
Second, the quality of the nozzle and ink accounted for the main reason, followed by the voltage is stable, in addition to the usual maintenance operations.
1. Each switch must have a certain time interval, preferably after 5 minutes.
2. It is best to turn off the digital sublimation printer when changing the nozzle. Ensure that there is 20ml of ink inside the nozzle. Do not over or under too much. Note that the new nozzle should be filled with ink. Use a syringe to inject 20ml of ink into the inside. Push the ink gently, or pull it out to let the syringe automatically inject the ink. After that, use a manual vacuum cleaner to draw a little ink. After the magic, you can't wipe the nozzle of the nozzle with a paper towel. Gently clean the ink on the nozzle of the nozzle, then inject and color test, then start printing. image.
3, the ink tube must be guaranteed to be unblocked, the ink tube can not be folded. There must be no air inside the ink tube. The ink in the left end of the large ink cartridge connected to the ink tube should not be too small or exceed 2/3 of the ink cartridge.
4. The six-color photo machine prohibits printing and cleaning.

Sublimation Printer

5. The ink must be drawn by a manual ink extractor.
6. The sublimation inkjet printer reports an error, such as current overload or over temperature. After seeing which color is the color, it should be shut down immediately. After the problem is solved, it is best to check whether there is ink on the contact strip and the nozzle chip. If it is cleaned, it will be turned on after 5 minutes.
7, before the work, first color infusion, then 100% color test print, then print the picture.

More Info:
Website: www.skyimagepaper.com
Company Name: Fei Yue Digital Technology Co.,LTD
E-mail: sales@feiyuepaper.com
Tel: 86-025-86628894
Whatsapp: +86 15007920742
Address: Central Road 323, Nanjing, Jiangsu, China