How to choose premium sublimation paper based on ink to reduce your printing cost?

As we all know, the cost of sublimation printing is very high, ink is the key to printing, so we should choose high quality  sublimation ink. Do you know how to choose the right premium sublimation paper based on the selected ink and reduce your printing cost?

1. Choose suitable weight of sublimation transfer paper according to ink load:

Premium Sublimation Paper 

(1). Low ink injection: For low ink printing, 70 g and 100 g heat transfer sublimation paper should be selected. As long as the ambient humidity control (air conditioning dehumidification or evaporation humidification) is between 40-60% RH, it can print smoothly.
(2). High ink-jet capacity: In order to print large areas of dark patterns, such as dark block patterns, 120 grams of transfer paper should be selected. The ideal ambient humidity is between 60-70% RH. If the user only has 80g and 100g transfer paper, please be careful not to let the transfer paper get wet first. Secondly, please control the humidity of the printing room at 50% RH. If you do, you can also use lighter weight transfer paper. Print high ink jet mode smoothly.

2. Choose the appropriate weight of sublimation transfer paper according to the relative humidity of printing environment:

Sublimation Transfer Paper

(1). Low humidity: 80 grams sublimation paper should be selected for printing under humidity less than 45% RH (without humidifying equipment). Because in low humidity environment, the paper shrinks and the whole printing surface arches upward, and the absorption of ink wrinkles becomes more obvious during printing, which is relatively hard for 120g and 100g transfer paper. The arched nozzle rubs easily. 80g transfer paper is thin and flexible, which can reduce the degree of arch, and is easier to be absorbed by the suction table of the printer without being too arch.
(2). High humidity: 120 g dye sublimation paper should be selected for printing in humidity above 70% RH (there is no dehumidification equipment in the printing room). Because in high humidity environment, paper will absorb moisture immediately, resulting in paper softening, hardness will be reduced, paper will slowly elongate. Therefore, in the printing process, the paper outlet shaft will be slowly arched on both sides, through the paper roll. Pull the ribs out to wipe the nozzle. Because 100 grams and 80 grams of paper are not hard enough in high humidity environment, it will be difficult to print. 120 grams of paper is hard. In high humidity, the back is not easy to arching. Even if it is a little arched, the rubbing wheel will not pull out the ribs and print smoothly.

More Info:
Website: www.skyimagepaper.com
Company Name: Fei Yue Digital Technology Co.,LTD
E-mail: sales@feiyuepaper.com
Tel: 86-025-86628894
Whatsapp: +86 15007920742
Address: Central Road 323, Nanjing, Jiangsu, China

Refill Sublimation Ink -How to Check And Deal With The Flow Frequency of It

When we using a sublimation printing machine, sometimes there is a refill sublimation ink blocking the nozzle, or the device leaks inkjet. Do you know why?
Nowadays, many inkjet printers use Epson 5th generation print heads. At the same time, piezoelectric inkjet printers also have many problems. If the ink refill ink jet printer after the poor fluency, printing in the tens of centimeters may appear after a short-term situation.

1.Air plug:

The dye sublimation inks used in today's piezoelectric inkjet printers are water-based dye inks that bubble up during ink replenishment. Because the ink pump in the ink pump will be sent to the process of the ink and bubble together. You can start a head test.When you see the ink out of the whole, the air bubble in ink print pictures.

Refill Sublimation Ink

At this point, the bubble in the ink is not completely out of the ink, due to pressure, there will be some very small bubble in the ink. When ink is sprayed during printing, bubbles build up at the nozzle. A large number of small bubbles form large bubbles that block the nozzle and form air plugs. This causes the ink to break after a certain period of time during printing. This can happen when you are just replacing ink or installing a new machine.

(1).Solution: 

fill the cartridge with ink. Before printing, let the ink at the nozzle print out and leave the machine for 20-30 minutes. This removes the smallest bubbles in the ink and minimizes the possibility of gas clogging.

(2). Inspection methods

After injecting 25ml to 30ml of sublimation transfer ink into the nozzle, inhale air from the pipe to install the sprinkler head. Then place the sprinkler three seconds above the cart and turn it upside down. There will be bubbles rising inside the sprinkler head. If the bubble rises and slowly stops, it is normal. If it rises and does not stop, the device is judged to be leaking.

2.Leakage phenomenon

When painting pictures, bubbles will not enter the nozzle; The foam is back; Serious ink accumulation in nozzle hole; The contact belt is stained with ink; Ink will break when painting pictures.

Sublistar Sublimation Ink

Solution: The above phenomenon is installation hole leakage. Excessive force may be present during installation. Then open the nozzle mounting hole. We can cover the nozzle mounting hole with the middle hole of the bicycle inner tube to brighten the ink needle.
Be careful when installing and using water-based sublimation ink, follow the instructions.

More Info:
Website: www.skyimagepaper.com
Company Name: Fei Yue Digital Technology Co.,LTD
E-mail: sales@feiyuepaper.com
Tel: 86-025-86628894
Whatsapp: +86 15007920742

Address: Central Road 323, Nanjing, Jiangsu, China

Eco-Solvent Ink-How to Distinguish Its Quality and Choose It Better

Eco-solvent inks are mostly used in indoor and outdoor advertising industries. This kind of ink is green and environmentally friendly. It is an excellent choice for advertisers.

The definition

Eco-solvent ink also known as light-solvent ink, takes longer to dry, which entails less maintenance for the printer itself. The ink is able to print on a variety of uncoated

Eco-solvent ink

surfaces and maintain its bright colors. Once printed, the ink will be waterproof and resistant to scratches. Your graphic will last up to three years before the color begins to fade. When using this ink, there will be a wide range of colors available. In addition to standard CMYK (cyan, magenta, yellow and black) inks, you may have the additional option of adding green, white, violet, orange, light magenta, light black and light cyan. Depending on your printer, you may have the opportunity to print in metallic shades. If you print on vinyl, your graphic will require a layer of white ink in order to keep your graphic visible in front of a direct light source. It is best for trade show graphics, window hangings, banners and vinyl graphics.

How to Discern the Quality?

1. Ink purity

Depend on the PH value, water content, impurities of the ink can identify high-quality inks. Low purity ink have great damage on print head.

2. Do not wipe print head frequently

Do not frequently wipe the print head when you use high quality ink. It is a waste of ink, but also easy to produce color, thus affecting your resolution of the ink. 

3. the performance of high-quality ink

High-quality ink is not flammable explosion and low damage to the human body. Most importantly, high-quality this ink with light and weather resistance, outdoor painting can withstand long-term sun, the seasons will not change the color difference.

4.The way to buy inks

It is recommended to go to a well-known store or a cooperative company to buy this ink. For example, like Nanjing Feiyue Digital Technology Co.,LTD, our ink is green and color fast, and the degree of washing is 4-5,wide gamut,good transfer rate.High compatibility,suitable for the printer equipped with dx5,ftp,dx7,5113,4720 print heats.

How to use the inks better?

1. Because of some characteristics of the this ink itself, the selection of CISS system should be particularly careful. Sometimes,the outer ink cartridge leaks when people use the ink and then the elbow connecting the ink pipeline blockages,and eventually lead to sprinkler printing broken line.Therefore,it is necessary to remember ink should be used with corrosion resistant cartridges,especially for desktop printers. If the equipment is not used for a long time, attention should be paid to the cleaning of the nozzle part so as to avoid the clogging of the nozzle caused by the volatilization and solidification of residual ink.

2.Water-based eco-solvent ink can be coat-free printing on some materials, or can be coat-free by means of printer heating, but for some smooth surfaces, ink can not be printed on by itself and will accumulate together which will lead to a unclear image.

Eco-solvent printer

This inks are generally used in the advertising industry,If you want to use in the clothing and home industries, sublimation inks are more suitable.

More Info:
Website: www.skyimagepaper.com
Company Name: Fei Yue Digital Technology Co.,LTD
E-mail: sales@feiyuepaper.com
Tel: 86-025-86628894
Whatsapp: +86 15007920742
Address: Central Road 323, Nanjing, Jiangsu, China