Sublimation transfer printer-what should we pay attention to in wet weather?

When the weather is always wet and rainy, the air humidity is very high, and sublimation transfer printer failure and technical problems are prone to operate in this environment. For example, the phenomenon of photo fading quickly fades and melts water, and the phenomenon of misunderstanding ink is not uncommon. So, what should you pay attention to when operating the photo machine in wet weather?

1. For the selection and storage of photo machine materials

 Sublimation transfer printer

First of all, the material of the sublimation printing machine should be placed correctly. Many users usually do not pay attention to the storage of materials, and often stack them randomly. Especially in winter rainy days, the air humidity can reach more than 90%. So there will be a lot of water in the air, on the ground, and on the walls, but the photo materials are mainly composed of paper and a coating on paper. Paper and coatings are very water-absorbing and moisture-absorbing. Moisturized photo materials are very likely to cause the appearance of ink spreading. This is also what we usually say is loose ink.  The printed image will be clear with scattered small burrs. Therefore, you should pay attention to the storage of photo materials. After each use, put it back in the original packaging and place it on a special shelf in a suspended manner. Do not touch the ground and walls. This can effectively prevent the media from being affected by moisture.

2. Aspects of cold-laminated image after printing

Due to the high humidity in the rainy weather in winter, the color of the photo screen dries slowly, especially for the screens of red, purple, etc., it takes a long time to completely dry. Often, some customers pass the film before the picture is completely dry in order to deliver the product in a hurry. This approach will cause the picture to become blurred and water quickly in a short time. Because it is affected by the air temperature, you must wait until the screen is completely dry before passing the film. If it is urgent, you can use a hairdryer, a picker, etc. to perform a local heating station before it is completely dry, and then pass the film, so that it is convenient and efficient to film the image screen.

3. The appropriate choice for photo machine ink

 Sublimation printer

Since the ink formula of each manufacturer is different, the saturation, brilliance and drying time of the colors displayed by each ink is different, so the choice of photo ink is also very important. Here, it is recommended that you should follow the ink recommended by the photo machine manufacturer or the ink used in the original photo machine. Do not use inferior ink, and do not ignore the serious malfunction of the photo machine caused by the use of inferior ink.

The above three points, the precautions for the use of inkjet sublimation printers and related consumables in the wet climate of rainy winter days, I hope to help everyone, let your photo machine have a perfect winter.

More Info:

Website: http://www.sublimationstar.com/

Company Name: Fei Yue Digital Technology Co., LTD

E-mail: sales@feiyuepaper.com

Tel: 86-025-86628894

Whatsapp: +86 15007920742

Address: Central Road 323, Nanjing, Jiangsu, China

High-precision large format inkjet printers-what are the advantages of using it?

In today's inkjet printing industry, high-precision large format inkjet printers are a typical representative of printing equipment. It is the mainstream printing equipment in the advertising inkjet printing industry, and the most representative inkjet printing equipment technology development in the inkjet printing industry.

The application of the piezoelectric digital printing machine first gives the first impression: stable performance, high printing accuracy, and fast speed. Of course, these advantages are also obvious advantages compared to traditional inkjet printers.

Piezo photo machines are now widely used in various industries. The reason is also because it combines many advantages. With the continuous development and improvement of domestic inkjet printing technology, its application advantages are more obvious. Of course, such an excellent product will definitely be widely used in different industries.

High-precision large format inkjet printer

The biggest feature of the piezo photo machine consumables is the combination of water and oiliness, which is more conducive to outdoor type inkjet printing and indoor type inkjet printing. For example, the indoor piezoelectric photo machine makes the water-based consumables stable, easy to operate, high yield, and colorful. For outdoor photo printers, the application of inkjet printing for outdoor advertising, the weak solvent ink products have good weather resistance, simple procedures, waterproof and self-cleaning, and low price. Piezo photo machine consumables overcome the shortcomings of water-based consumables, complicated procedures, high loss of finished product of the twisted film, unstable water resistance, and high price. They also overcome the problem of easily clogged nozzles of weak solvent inks and oily inks, and dull colors. The disadvantage of low accuracy.

Among the many products of domestic digital textile printers, such as Chinese ORIC printers, they are domestic brand machines, with high-quality user experience design, high-precision manufacturing technology, and a stable print control system. The ORIC series of outdoor internal piezoelectric photo machines use Epson nozzles with the best stability in the domestic market and provide different width models, users can choose. The highest resolution of the printer can reach 1440 * 1440dpi, the printing speed is fast, it can really achieve high-speed and high-precision printing, and perfectly display high-quality image quality. Four-color CMYK color ink is used to easily achieve a variety of color printing effects; the use of a high-speed continuous ink supply system eliminates the need for frequent ink refills, and the printing mode is highly intelligent, and it is easy to complete printing tasks without labor for a long time. The print head is equipped with an adjustable system, which can automatically adjust the print head height according to the thickness of different print media to meet the different needs of different media. The drive system is equipped with dual servo motors to run at higher speeds to ensure printing speed. It uses fast-drying ink and an embedded intelligent front heating system to completely eliminate the problem of image drying.

 Inkjet printer

The most outstanding advantages of the piezoelectric digital printer are that the ink used is colorful and full, good fluidity, extremely low corrosiveness, environmental protection, and weather resistance. The application of the piezoelectric photo machine can not only work stably under the conventional precision, but also have very delicate performance even under the 1440 line, and can even meet the printing work of high-precision photos.

Due to its unique working principle, the produced picture is full of three-dimensionality, and the color is excessively smooth and soft. The application advantage of the piezoelectric photo machine in high-precision inkjet printing is very obvious.

More Info:
Website: http://www.sublimationstar.com
Company Name: Fei Yue Digital Technology Co.,LTD
E-mail: sales@feiyuepaper.com
Tel: 86-025-86628894
Whatsapp: +86 15007920742
Address: Central Road 323, Nanjing, Jiangsu, China

Inkjet printing machine-analysis of the causes of it crashes and countermeasures

Once the inkjet printing machine crashes, the consequences are serious. Generally, a large number of screens will be invalidated, causing considerable losses. A crash occurs when printing stops suddenly and automatically during the printing process. The causes of this phenomenon are more complicated. The causes and countermeasures for crashes are detailed below.

1. Type of crash

Inkjet printing machine

It is divided into two categories: one is a complete crash, that is, the motion system stops working; the other is an incomplete crash, which is indicated by the print data interruption, but the motion system is still working. The latter brings greater harm and loss than the former.

When the digital textile printer crash occurs, the entire system is in a chaotic state and the device and software must be restarted. It's normal if this kind of failure rarely occurs (people can make mistakes, not to mention the machine?), But it often has problems.

2. Analyze the reasons

The causes of the crash of the inkjet printer are mainly divided into 4 aspects: 1. mechanical failure; 2. interference; 3. software failure; 4. circuit failure. There may be multiple reasons for the same inkjet printer, and you need to check carefully to find the cause. Detailed descriptions are as follows:

(1) Mechanical failure

 Inkjet printing machine

Case 1: The moving track of the nozzle carriage is blocked or insufficiently powered; this situation rarely occurs on new equipment, and equipment with a longer usage time may appear. The inspection method is to remove the motor belt, separate the nozzle carriage from the motor, and then push down the carriage by hand. If the movement is not smooth, you should replace the track or slider because the resistance to the carriage at this time will cause mechanical and electrical malfunctions and crash.

Case 2: The motor of the print head is faulty. Such failures cause many crashes. The print head motors of the printer are mainly divided into AC and DC. Among them, the AC type has relatively few failures, which are often caused by the use of a long time due to wear and tear. The DC type has many failures. It not only causes crashes due to wear, but also some unexpected failures, which cause headaches.

(2) Interference

The sources of interference to the printer include external interference and internal interference. The main analysis of the internal interference situation is:

a. Data transmission interference: Data cables that do not have shielding or poor shielding functions are susceptible to interference and cause unstable work. Therefore, data cables with excellent performance and high quality should be used. It is particularly proposed that although the optical fiber has excellent resistance to dry winding, it is not suitable for frequent bending motion environments.

b. Spark interference: In the inkjet printer, if parts that easily generate sparks are used, it will cause a lot of unexpected failures.

(3) Software system

The software system is the commanding brain of the digital inkjet printer. As you can imagine, there is something wrong with the brain. Can it run normally? A software problem occurred on a patchwork machine.

More Info:

Website: http://www.sublimationstar.com/

Company Name: Fei Yue Digital Technology Co., LTD

E-mail: sales@feiyuepaper.com

Tel: 86-025-86628894

Whatsapp: +86 15007920742

Address: Central Road 323, Nanjing, Jiangsu, China

How to Choose Inkjet Printer with Cutter for Your Outdoor Advertising Printing?

Inkjet printer with cutter is now loved by most advertisers. How to choose a high-quality printer is an important start for us to start the printing industry. Clothing heat transfer is mainly used in T-shirts, cultural shirts, advertising shirts, coats, jeans, children's clothing, plush toys, sportswear, etc. It prints the pattern on a heat transfer film and then manually transfers it to clothing fabrics. And many heat transfer printed patterns are very complicated, so some businesses will use the spray and engraving machine to print the pattern and carry out, then which brand of spray and engraving machine is better?

Inkjet Printer with Cutter

Clothing heat transfer has a wide range of applications. Compared with traditional screen printing and water slurry printing, heat transfer is environmentally friendly, fast and easy to apply. It has replaced other accessories in many fields. In addition, heat transfer is gradually well known and recognized by domestic customers. Some brand clothing and brand bags have also started to use heat transfer products. The prospect of the heat transfer industry will become better and better, and competition will become more intense.   

Speaking of the digital outdoor banner printer and engraving machine brand, we have to talk Roland. Roland is an internationally renowned digital printer brand. Its printer and engraving machine vs300i has been favored by many customers around the world. Roland VS-300i printing machine is simple to use, as long as a computer, spraying and engraving machine and heat press machine can be used.                                   

Digital Printer

The Roland VS-300i spray and engraving machine can quickly print text or patterns and can automatically cut as many as you want. It does not need to make plates, saves time and costs of making plates, and is immediately desirable, saving manpower and material resources. Rolled packaging allows you to cut as many as you want, maximizing the use of corner materials, avoiding waste and controlling costs.
          
In addition, the VS-300i inkjet printing machine can use neutral black ink to obtain the neutral gray and accurate photographic images required for smooth grayscale gradation or produce a naturally flat skin tone including light tones and mid-tones. But black also helps with accurate color reproduction of company-branded materials, such as clothing or cosmetics.

The VS-300i printer integrates the industry's nozzle technology and Roland's famous print/cut technology. The new Roland metal color library has added a variety of metal and pearl colors, allowing users of VS-300i to replace labels. , Banners, body stickers, art posters, packaging prototypes, labels, stickers, POP displays or digital clothing printing, etc. plus gorgeous metal effects.


More Info:
Website: http://www.skyimagepaper.com
Company Name: Fei Yue Digital Technology Co.,LTD
E-mail: sales@feiyuepaper.com
Tel: 86-025-86628894
Whatsapp: +86 15007920742
Address: Central Road 323, Nanjing, Jiangsu, China

Large Format Domestic Inkjet Printer-The Requirements of Computer Configuration for It

The large-format domestic inkjet printer is a very common printout device in the advertising photo printing industry. It needs to be connected, typeset, and set up through a computer, and finally printed out. So, what kind of configuration is required for the use of a domestic inkjet printer? What are the requirements for the computer configuration of the printer?

Large Format Domestic Inkjet Printer

With the rapid development of the Internet today, the replacement of ordinary office computers is also very fast, from single-core to dual-core processors, to quad-core and even eight-core processors. The hardware is constantly developing towards a higher core. At the same time, with the use of operating systems and related applications, computer hardware configuration needs to be higher and higher, and the operating speed must be faster and faster. As for the use of piezoelectric photo machines, in fact, ordinary daily office computers can meet its requirements, such as dual-core CPU, 1GB to 2GB of memory, 250G hard disk, integrated graphics card or independent graphics card. The motherboard provides about 2 to 4 USB interfaces, and the wired network card interface is sufficient. No other special interfaces and configurations are required (such as printing serial ports).

Many of the older generation printers used serial cables to connect to the digital textile printer. Due to the slow transmission speed of the interface, the installation requires tedious drivers and other operations. The technology is backward and the operation is troublesome. Slowly, many computers have eliminated these interfaces. Now the new-generation computer motherboards are not equipped with these interfaces, and all are using USB or other interfaces for transmission. Especially the USB interface, plug and play, and fast transmission speed.

 Digital Printer

As mentioned above, although the computer configuration of the piezoelectric digital printing machine is not high, but in order to make the computer operate more smoothly, if the conditions allow, you can buy a computer with a higher configuration, because for design companies or advertising production shops, both Need to process and design the picture image, these design software need high configuration, so that the operation is smoother. It is recommended to have a high-end computer configuration, such as an I3 processor, 4G of memory, a 1GB single graphics card, a 500G hard disk, and a major brand motherboard. The quality is guaranteed. The configuration of  these hardware can fully support the daily layout and print output requirements of the photo machine.


More Info:
Website: http://www.sublimationstar.com
Company Name: Fei Yue Digital Technology Co.,LTD
E-mail: sales@feiyuepaper.com
Tel: 86-025-86628894
Whatsapp: +86 15007920742
Address: Central Road 323, Nanjing, Jiangsu, China

Digital Textile Inkjet Printer-Six Factors Affecting The Print Quality of It

Although in digital printing, digital textile inkjet printer inkjet printing has about 5% market share. However, the development of inkjet printing is more or less restricted by some factors. At present, the factors affecting the quality of inkjet printing are mainly the following.

1.Color conversion

How to accurately convert the color of the light source system (R, G, B) to an inkjet or printing system (C, M, Y, K) is a very complicated science, but only by accurately converting the color can we obtain Real high-quality effects. Therefore, accurate color conversion technology is an important key to the quality of inkjet printing.

2.Resolution

Digital Textile Inkjet Printer

The higher the resolution, the finer the resolution and gradation dots printed, the better the printing quality. But for a color inkjet printer, the resolution refers to how many dots can be printed on a 1-inch width, regardless of whether the dots overlap.

3.Color scale

The current inkjet printing technology of digital printing machine can precisely control the color level of the ink droplets, and control the color ink from not spraying to spraying one drop to spraying 16 drops at the same position.

4.Print head control

The ink dot is sprayed onto the paper through a nozzle. Generally speaking, the nozzle and the printing head are made together, so the technology of the printing head itself is very important. Precision of transmission belt.

5.Ink

 Inkjet Printer

Inkjet printing inks are special inks with moderate viscosity. They should be non-toxic, stable, non-clogging nozzles, good moisturizing properties, good ejection properties, and non-corrosive to the metal components of the nozzle. At present, most inkjet inks are dye-based inks. The inks of inkjet piezoelectric photo machines must also have sufficient surface tension to prevent the ink from spattering when ejected. In addition, the ink must have fast-drying properties to prevent halo on the paper. Therefore, the ink itself is one of the factors affecting the printing quality.

6.Substrate material

The printing media of inkjet printer requires paper with a smooth surface and a certain sizing degree. The sprayed ink evaporates to dryness, the ink dots are round, the printed characters are clear, and the graphics are beautiful. For color inkjet printing paper, it is best to have a very thin transparent coating on the surface, which can quickly absorb the ink and avoid light scattering in order to obtain the ideal print.


More Info:
Website: http://www.sublimationstar.com
Company Name: Fei Yue Digital Technology Co.,LTD
E-mail: sales@feiyuepaper.com
Tel: 86-025-86628894
Whatsapp: +86 15007920742
Address: Central Road 323, Nanjing, Jiangsu, China

Sublimation Transfer Printer-Pay Attention to The Ink Tightness When Using It

If the sublimation transfer printer's running-in ink leaks and ink leaks occur, it will easily cause problems such as ink cut or print disconnection when the photo machine is drawing, which will affect the quality of the drawing. Therefore, in the process of using and maintaining the photo machine, it is necessary to pay attention to the tightness of the ink supply system and the ink circuit of the photo machine.

Sublimation Transfer Printer

Generally, in the printout of a dye sublimation printer, if you find white lines on the image screen, a missing color or a missing ink drop from the ink cartridge when printing, it is recommended that you check the ink supply problems of the related ink supply system and the ink Road tightness.

What is the common phenomenon of printer cartridge leakage? How should we solve it?

During the normal use of the printer, the nozzle is tightly connected with the ink tube and the ink supply cartridge. The siphon principle is used to continuously and continuously supply ink to the nozzle during the printing process of the photo machine to ensure the inkjet printing of the nozzle. The performance of the printer when the air is leaking, for example, the photo machine will not bubble into the print head during the process of printing, the phenomenon of air bubbles flowing backward, the ink accumulation in the nozzle hole is very serious, and the contact zone will be stained with ink. There will be broken ink, etc. These are relatively obvious air leaks related to the poor ink supply of the photo machine. In this case, it may be caused by air leakage of the ink cartridge, or the seal at the elbow interface or the related ink supply tube is broken. Please check the sealing condition of the interface between the ink injection connections, the ink cartridge interface, and the ink bag. You can also remove and reconnect these interface connections to avoid looseness at the interface affecting the sealing of the connection.

 Sublimation Printer

Similarly, the poor sealing of the ink supply pipeline of the digital textile sublimation printer also causes the problem of ink dripping in the photo machine, especially during printing, which directly affects our printing quality. Therefore, in the daily use of the photo machine, we must pay attention to the tightness of the ink supply pipe of the photo machine. To ensure the tightness of the ink supply piping system connection, check the ink storage tube cap and tighten it to ensure that there is no loosening, or reinforce the sealing nozzle and pin connection port to avoid loosening. At the same time, when adding maintenance operations such as adding ink to the photo machine, pay attention to the correct ink filling operation, and follow the ink filling operation instructions provided by the photo machine manufacturer. Pay attention to the standard storage ink volume of the ink cartridge. Generally, the ink capacity is 2/3 of the best. Do not make the ink volume of the ink cartridge full or low.

In addition, during the use of the printer, if you find that the related ink supply tubes, ink cartridges, and ink sacks are leaking, please replace them in time to keep the photo machine at the best-uninterrupted ink supply status at all times. Print out a more perfect picture.

More Info:

Website: http://www.sublimationstar.com/

Company Name: Fei Yue Digital Technology Co., LTD

E-mail: sales@feiyuepaper.com

Tel: 86-025-86628894

Whatsapp: +86 15007920742

Address: Central Road 323, Nanjing, Jiangsu, China

When Buying Dye-Sub Printer, What Should Pay Attention to In Addition to Performance

When you buy a dye-sub printer, you can't just look at its performance. The subsequent use of consumables, after-sales service, and installation training are all that we need to consider. After the buyers and sellers reached a deal, the cooperation relationship between the two parties was not terminated, but the beginning of the cooperation between the two parties.

Dye-Sub Printer

The strength background and brand reputation of sublimation inkjet printer manufacturers must be examined, just like using it with someone, first of all, it depends on his character. The brand's after-sales service is also not to be underestimated. No matter how good or excellent the performance of the photo machine is, faults and later parts are essential. If there is a problem, the manufacturer cannot solve it in a timely manner, which is a waste of time and a normal connection single. Therefore, a brand with a high reputation and a good brand is your best choice, so that consumers have a sense of security because these photo machine manufacturers must have won the trust of many customers in the market. This is also the evaluation they have accumulated over the years. Good channels have been formed in product development, quality, and service. In order to guarantee the services in all aspects in the later period, the purchaser can sign a detailed purchase contract after the payment is completed, so as to use the law to safeguard their rights and interests when necessary.

Sublimation Printer

Finally, remind users who buy large format sublimation printing machines, do not only care about the maximum speed but ignore the standard speed. In fact, the standard speed is the main indicator of the work efficiency of the photo machine, and the maximum speed is not beneficial for future use. Also, when choosing a wide width, you must choose according to the actual situation of your business. For example, if more than half of your usual business is 1.8 meters or more, you can choose a 2-meter device. Of course, if the economic budget allows, you can also choose Wide for future business development.

More Info:

Website: http://www.sublimationstar.com/

Company Name: Fei Yue Digital Technology Co., LTD

E-mail: sales@feiyuepaper.com

Tel: 86-025-86628894

Whatsapp: +86 15007920742

Address: Central Road 323, Nanjing, Jiangsu, China

Digital textile sublimation printing ink-how to reduce the cost of it?

In fact, the digital textile sublimation printing ink is also skillful in use. If it can be combined with equipment maintenance, it can save a lot of maintenance costs and reduce the loss of nozzles, thereby reducing the overall cost.

Digital textile sublimation printing ink

First of all, talk about storage skills: the storage environment of the water-based sublimation ink should be consistent with the use environment. This should be paid more attention to the harsh weather. This is because the equipment and ink requirements are relatively strict in general. In winter and summer, the temperature of the warehouses and workshops of most companies are very different. Therefore, the use of the ink just taken out of the warehouses is often not smooth, and sometimes it does not work properly, which affects the efficiency of work. The best solution, in this case, is to get the ink into the use environment a few hours in advance and wait until the ink temperature reaches the requirements before using.

There is also a bad habit. I don’t know if everyone has it. In order to reduce the

Sublimation ink

working capital, many inkjet manufacturers try to run out of ink before ordering the next batch of ink. This approach reduces the company's operating costs, but it also Brings a disadvantage. This has to be said from the perspective of ink manufacturing because the ink is a chemical product. As we all know, even if the chemical product is perfected and the test is strict, it will inevitably cause batch instability. Because of this, the scale is even larger. Ink manufacturers do not dare to guarantee that each batch of ink produced by them is stable. Therefore, the above-mentioned method is very easy to cause ink cut-off due to a problem with a certain batch of ink that cannot be printed normally, which not only affects production but also easily loses customers. In view of this, the correct approach is to be able to prepare more goods, at least to ensure that the next batch of goods will be delivered. In addition, new shipments should be immediately used on the machine to determine whether the new ink is easy to use. If there is a problem, immediately replace and exchange the new ink. If there is no problem with the new ink, the old ink should be used up first to prevent the old ink from expiration.

Another point is that when we run out of sublimation printer ink, we need to clean the ink path and replace the filter regularly. Many manufacturers do not have the habit of cleaning the ink circuit, which is not desirable. Because the ink pollution is inevitable and unavoidable, only through regular replacement and maintenance to prevent unnecessary damage to the print head.

More Info:
Website: http://www.skyimagepaper.com
Company Name: Fei Yue Digital Technology Co., LTD
E-mail: sales@feiyuepaper.com
Tel: 86-025-86628894
Whatsapp: +86 15007920742
Address: Central Road 323, Nanjing, Jiangsu, China

Advertising digital printer-how to choose high-quality ultra-thin light box and lamp for it

Today, business is developing rapidly, and the promotion and sales of products cannot be separated from advertising digital printer. In daily life, different advertisement displays are everywhere around us. Today we will briefly describe the selection of high-quality light films for photo machines, and the production of light box advertisements will allow better print output.

Advertising digital printer

Light box advertisements are beautiful and generous and have strong advertising effects. They are easy to attract people's attention, so they are also widely used by advertising manufacturers. In the production of light box advertisements, with high-quality light films and high-precision printouts equipped with Wuteng photo machines, a perfect light box advertisement will have perfect effects that you never expected.

In the production of normal digital textile printer light box advertisements, it is also very important to choose high-quality light box lights. However, the quality of ultra-thin light box lights directly affects the life of the light box. Be extra cautious.

First of all, when selecting and purchasing photo light film, pay attention to the material of the light box light film. For the overall material of the light film, it must first be soft, thin, and light-transmissive.

Inkjet printer

The second is the temperature requirements of the light film. In our common light box advertisements, relevant light tubes are placed, and the light is illuminated outward through the light tube so that the picture of the light film is more beautiful and eye-catching. However, the light will generate a certain amount of heat during long-term use, that is, the temperature will be high. Therefore, for high-quality and ultra-thin lamps, we need a certain high-temperature resistance. Under the influence of temperature, the lamp will be deformed or other problems will affect the quality.

In addition, in the process of using the digital printing machine to print the light film and the light box light film, some users asked, what is the reason for the white dots on the surface of the light box installed light film? For this problem, there may be the following reasons: For example, the screen is not completely dry after the printout of the photo machine, there is moisture, or there is an abrasion in the light guide plate. Finally, if the screen is pressed, white spots will appear Phenomenal.

Therefore, when we usually choose light box lights and make light box advertisements, the correct selection of the lights is an important link.


More Info:
Website: http://www.skyimagepaper.com
Company Name: Fei Yue Digital Technology Co.,LTD
E-mail: sales@feiyuepaper.com
Tel: 86-025-86628894
Whatsapp: +86 15007920742
Address: Central Road 323, Nanjing, Jiangsu, China

Is the plug of outdoor photo machine related to the voltage instability?

For outdoor photo machines, nozzle plugging is a common problem. As a large, wide-format inkjet printer, using piezoelectric inkjet technology or thermal foaming technology, the plugging problem will also exist. Today, I want to briefly describe whether the plugging of outdoor photo machines and the instability of the voltage have any effect?

 Outdoor photo machine

When the inkjet printing machine is used to print pictures on a daily basis, the plugging of the photo machine is often found, especially when the photo machine is suspended for a long time and the maintenance of the print head is not done well. But are these failures related to piezoelectricity? The voltage of the photo machine is unstable. Will it cause the photo machine to be blocked frequently? It can be said that there is no direct relationship between the voltage and the nozzle plug, but the unstable voltage easily burns the nozzle circuit, such as the damage of the mainboard, and it may also cause the nozzle circuit damage. If the voltage of the photo machine is unstable, it is recommended that the user install a voltage stabilizer for the photo machine, and it must be installed in order to better protect the print head.

Digital printer

Therefore, the unstable voltage of digital textile printer will not block the head, but it will lead to a drastic reduction in the life of the nozzle, and even directly burn the nozzle, especially the thermal foam photo machine. However, whether it is a thermal foam photo machine or the latest piezoelectric technology piezoelectric photo machine, it is still recommended to install a voltage stabilizer for the photo machine, and the sooner it is used, the safer it will be. Adding a stabilizer is not expensive, and if the nozzle is damaged due to unstable voltage, it will be worth it. The thermal foaming nozzle is okay, and its price is not expensive, but if the nozzle is often damaged due to voltage problems, it is also a headache. As for the piezoelectric photo machine, let alone this, the piezoelectric photo machine uses Epson's piezoelectric nozzle, which is the core component of the photo machine, and its quality is critical to the photo machine.


More Info:
Website: http://www.skyimagepaper.com
Company Name: Fei Yue Digital Technology Co.,LTD
E-mail: sales@feiyuepaper.com
Tel: 86-025-86628894
Whatsapp: +86 15007920742
Address: Central Road 323, Nanjing, Jiangsu, China

Large format digital printer-how to maintain image accuracy in its output

In order to obtain high-quality output effects in the large format digital printer color output, we must pay attention to the source file quality. There are two main ways to obtain the source file. One is obtained by scanning the material. At this time, the performance of the scanning device has a decisive influence on the quality of the generated file. The quality of the file obtained by scanning the same material on different devices is different. Another method to obtain the original image is to directly select it from the ready-made electronic picture library. At this time, the user cannot select the accuracy of the source image.

Large format digital printer

In theory, the file accuracy of the source digital inkjet printer image should be no less than 1/4 of the output accuracy in the case of 1: 1. For example, if a 10X10cm photo is to be enlarged to 100X100cm and output at 720dpi, the photo should be scanned at a resolution of not less than 1800dpi (calculation formula: source file dpi = magnification factor X (output dpi / 4)). If the accuracy of the source file is less than 1/4, the image will appear more grainy and affect the picture quality. If it is too large, the file will be too large, which will affect the drawing speed. In actual use, users often encounter such a problem. When scanning a photo, the accuracy of scanning needs to exceed the mechanical resolution of the scanner. At this time, the user only needs to scan the entire photo with the highest mechanical resolution of the scanner, instead of using the scanner's software interpolation function to improve the file accuracy. If the RIP software has anti-aliasing, it is best to turn it on. Example: 10X10cm photos need to be scanned at 1800dpi, and the scanner's mechanical resolution is 600dpi. The scan should be performed at 600dpi, so the scanned file is much smaller. On this basis, the image processing speed is much faster than the processing of 1800dpi images. You can increase the file accuracy before adding text or printing output. To get better scanning results, higher quality material is required. The order of scan quality of different types of materials is color positives, photos, and prints. For color negatives, it is best not to use it for non-professionals because it involves color reproduction. Among them, prints are the most common. The key to scanning prints is to choose the parameters for going to the screen. Users can first compare different parts of the material with different parameters to find the best parameters.

 Inkjet printer

Note: The optical resolution of a scanner refers to the accuracy of the optical components in the scanner. Mechanical resolution refers to the accuracy of the scanner's mechanical movement, similar to hardware interpolation. Software resolution refers to the resolution that the scanning program can achieve using interpolation algorithms.

Our company provides all kinds of digital printing machines, such as sublimation printers, eco-solvent printers, UV printers, 1.8m, 2m, 3.2m wide, which can be equipped with different Epson print heads. If you have any needs, please feel free to contact me or leave me a message below the post.


More Info:
Website: www.skyimagepaper.com
Company Name: Fei Yue Digital Technology Co.,LTD
E-mail: sales@feiyuepaper.com
Tel: 86-025-86628894
Whatsapp: +86 15007920742
Address: Central Road 323, Nanjing, Jiangsu, China

The processing steps of piezo photo machine doesn't respond after turning on

Nothing happens when the piezo photo machine is turned on, and all the indicators are off. What should I do? How can this be done? I collected and sorted out some reasons and shared them for your reference.

As there are many brands of inkjet printing machines, the causes are also different. In this case, we should first check whether the circuit is normal and then check whether the components are damaged.

 Piezo photo machine

1. First, check whether the power cord and socket of the machine are damaged or plugged in.

2. If all the above reasons have been ruled out, it is that the power board is broken.
Unfortunately, there is only one last reason. If the power board is broken, we generally can not repair it, it is suggested to contact the photo machine factory or agents to help solve it. Because there are so many other components on the power board, it's hard to know exactly what's wrong, or more will be damaged.

3. Check whether the machine power switch is damaged or out of order.

Inkjet printer

4. Paper cannot be detected: check the print loading item of the auxiliary function in the software menu to see if the paper can be detected. Reload the paper, and the machine with the display will prompt a paper-related warning. When the printer can not sense the paper will not continue to print the task, we need to check whether the paper is good, if necessary to re-test the paper.

5. Print port: we need to check if the IP addresses are consistent.

Network printing needs to unify the IP address, digital printer commonly used port USB is more, when changing the interface needs to adjust the corresponding Settings to normal use.

6. Computer system: some people say why you can print in the first place? This is also the case when computer systems are incompatible because incompatible conditions can cause the machine to be either normal or abnormal. It is recommended to reinstall the system or replace the computer.


More Info:
Website: www.skyimagepaper.com
Company Name: Fei Yue Digital Technology Co.,LTD
E-mail: sales@feiyuepaper.com
Tel: 86-025-86628894
Whatsapp: +86 15007920742
Address: Central Road 323, Nanjing, Jiangsu, China

The large format inkjet printing machine-how to clean its internal dust

A large-format inkjet printing machine has been in use for a year, and there is a lot of dust in it. I am afraid that it will cause many failures to the printer. I want to erase the dust. How can I remove the dust? What to pay attention to?

 Large-format inkjet printing machine

First, open the cover of the digital textile printer and use a clean, soft, damp cloth to remove dust, smudges, ink stains, and shreds from the inside of the printer. If the dust is too much, it will cause poor lubrication of the carriage guide shaft, which will hinder the movement of the print head during printing. You can use a degreased cotton swab to wipe off the dust and oil on the guide shaft and replenish better fluid lubricants, such as sewing machine oil.

Pay attention to the following points when cleaning the inside of the inkjet printer:

1. To wipe the gear, do not wipe the area near the print head and the ink cartridge.

2. In general, do not move the print head. In particular, the print head of some printers is mechanically locked, and the print head cannot be moved by hand. If the print head is forcibly moved, the mechanical part of the printer will be damaged.

Digital printer

3. Do not use any paper products to clean the inside of the digital printing machine, so as to avoid leaving paper scraps in the printer.

4. Do not use volatile liquids (such as thinner, gasoline, spray-type chemical cleaners) to clean the printer, so as not to damage the printer surface.

Our company provides sublimation printers, eco-solvent printers, UV printers, 1.8m, 2m, 3.2m wide, which can be equipped with different Epson print heads. If you have any needs, please feel free to contact me or leave me a message below the post.


More Info:
Website: www.skyimagepaper.com
Company Name: Fei Yue Digital Technology Co.,LTD
E-mail: sales@feiyuepaper.com
Tel: 86-025-86628894
Whatsapp: +86 15007920742
Address: Central Road 323, Nanjing, Jiangsu, China

Tarpaulin digital printer -common problems and solutions for two continuous systems of it

The ink supply methods of tarpaulin digital printers are not all uniform, but most of them are currently used for continuous ink supply systems. Then as a photo machine needs to be maintained, and this continuous ink supply system should also be well maintained to really ensure the print quality of the photo machine.

Tarpaulin digital printer

1. Regardless of the ink supply method, the ink tube is a key maintenance object, and the supply system is no exception. In order to ensure the normal ink supply, we need to check the ink inlets of the ink cartridges inside and outside the ink duct, the ink ducts, and the air filters of the outer cartridges to prevent the ink ducts from entering the air or being blocked. If there is a blockage, you can use a syringe needle to clear the ink outlet. If there is air, you can also extract air by this method.

 Eco-solvent printer

2. Sometimes there will be some bubbles in the ink cartridge of banner eco-solvent printer. Do not underestimate these bubbles. These bubbles can cause problems such as disconnection and lack of color in photo printing. At this time, we need to eliminate the foam before it can be used normally. The specific operation can be completed with a syringe. Take out the inner cartridge first, and use a syringe to pull out the ink in the cartridge. Remember not to rush out at this time, but to slowly pull out. The process at this time is that the ink from the outer cartridge will flow into the inner cartridge, and the ink from the inner cartridge will enter the syringe. After the syringe tube has been filled with ink, the ink in the tube, such as the outer cartridge, is repeated until the ink is free of bubbles.

The continuous supply system is also an important part of the eco-solvent printing machine. When the photo machine is usually maintained, remember to do all aspects of maintenance to ensure that the photo machine has a longer life!


More Info:
Website: http://www.sublimationstar.com
Company Name: Fei Yue Digital Technology Co., LTD
E-mail: sales@feiyuepaper.com
Tel: 86-025-86628894
Whatsapp: +86 15007920742
Address: Central Road 323, Nanjing, Jiangsu, China

Digital photo printer-how to correctly use the ink damper of it

Extensive application of digital photo printers, becoming the mainstream printing device for advertising inkjet printing. High-speed printing with stable performance is more welcomed by users. These high-quality stable performance can not be separated from the close cooperation of the small and large parts of the piezoelectric photo machine to play its important role.

 Digital photo printer

Among the accessories of these piezoelectric inkjet printing machines, there are core accessories, such as our common piezoelectric nozzles, etc., its functions are not described in detail here. What we want to share today is the common gadgets in the piezoelectric photo machine-photo machine ink sacs, these are our common and need to be replaced frequently. These small accessories that we often need and need to be replaced frequently. The correct use of the ink sac can check your photo machine, and the photo machine is better protected and used.

I believe that many users will observe that on the small frame of the photo machine, above the print head, there is a row of small transparent plastic bags connected between the print head and the ink tube. This is the ink sac of the photo machine, usually 4 groups of 8. For example, 8 domestic printers are installed in the printer, and the size is about 5cmx5cm. It is a translucent body with a half bag of ink inside and a filter inside. Its function is mainly used for filtering. The impurities brought by the ink reduce the probability of nozzles and clogging.

 Inkjet printer

The printer ink bag can better control the use of the digital textile printer, filter the ink, and avoid the impurities generated by the ink from blocking the nozzle. At the same time, it can deliver smoother ink to the print head of the photo machine, make the print head work better, and take the printout of the photo machine more beautiful and the color better. However, we need to replace the ink sac from time to time, otherwise, the probability of nozzle clogging is likely to be caused, because too many impurities in the filter or the ink sac without ink will cause the nozzle to be blocked. In the daily use and maintenance of photo machines, the ink sac is also a common replacement accessory. It also belongs to over-ink parts and wearing parts. Its price is relatively low, so frequent replacement will not cause excessive costs. Regular replacement Ink sacs can better protect the photo machine.


More Info:
Website: http://www.sublimationstar.com
Company Name: Fei Yue Digital Technology Co., LTD
E-mail: sales@feiyuepaper.com
Tel: 86-025-86628894
Whatsapp: +86 15007920742
Address: Central Road 323, Nanjing, Jiangsu, China

Photo printer-ambient temperature and cleaning method affect the life of its nozzle

The viscosity index of the ink will change with the change of the ambient temperature, and the corresponding working voltage of the corresponding photo printer nozzle will change accordingly. Otherwise, the injection of the nozzle will be unstable, and the phenomenon of disconnection and ink breakage will occur easily. When the temperature is high, the viscosity of the ink is lowered. At this time, the working voltage of the nozzle should be appropriately reduced. Otherwise, it is easy to form a bubble inside the ink tube, causing no ink to be ejected from the nozzle, resulting in a white line of the screen. Conversely, when the temperature is low, the viscosity of the ink will increase. If the working voltage of the nozzle is not adjusted, the ink will accumulate inside the ink tube. In a short time, it may be seen as a virtual spray. After a long time, the nozzle is easily irreversible. Damage, serious damage to the nozzle hole. The nozzle works from the beginning, the temperature of the nozzle plate is relatively low, but with the continuous operation of the piezoelectric ceramic, the temperature inside the nozzle plate will gradually increase, and as the ink is continuously ejected, part of the heat will be taken out. Finally, the working temperature of the nozzle will be constant at a fixed range. If you start from the beginning of the nozzle to the constant temperature stage, you need to adjust the nozzle voltage according to the nozzle plate or the ink temperature to ensure the normal operation of the nozzle. Otherwise, the nozzle will be unstable.

 Photo printer

For the processing of the digital textile printer nozzle not printing, in the actual printing process, the width of the screen often appears to be smaller than the design width of the nozzle, then the portion of the nozzle that does not come out will not be inkjet. If the ink is sprayed, it will cause a large amount of ink residue to be transported. If the cleaning is not clean, the belt life will be reduced. In addition, because of the interval between the nozzle and the belt, the small ink droplets ejected will drift around with the airflow, flying around the nozzle, and even the control circuit on the nozzle, affecting the normal operation of the circuit part, and being inhaled by the staff is also a great hazard. For this reason, the excess nozzle will not work. If the excess nozzle does not work, the ink in the nozzle nozzle and the ink on the nozzle surface will inevitably cause the ink to dry on the nozzle pipe and the nozzle surface due to volatilization, and the nozzle is blocked. Normally, the nozzle should be cleaned at regular intervals so that the ink in the nozzle tube is in a flowing state.

 Inkjet printer

The effect of the cleaning method on the nozzle. When the ink is ejected normally, the ejected ink droplets will have satellite points, and the satellite dots will adhere to the nozzle surface. As the printing time increases, the satellite dots will increase, thereby forming ink beads on the surface of the nozzle film. If there is damage near the nozzle hole of the nozzle plate, it is not conducive to the diffusion of the ink beads, it will accumulate around the nozzle hole, causing the nozzle hole to be temporarily blocked, and no ink is ejected; if it is not cleaned in time, or the cleaning is not complete, it is possible Causes the ink to dry on the surface of the mouth, speeding up the blockage of the nozzle orifice. In addition, because the cleaning method is not correct, or the cleaning material is incorrectly selected, the nozzle film may be scratched, and the nozzle may be scratched, as if the water is discharged from the faucet. If the water outlet of the faucet is damaged, then The water flow coming out is not under direct current, but is biased out. The same is true for the nozzle inkjet water. Once the nozzle hole is destroyed, it will directly cause irreversible damage to the nozzle. After the nozzle hole is destroyed, the ink around the nozzle hole is more likely to accumulate ink, block the nozzle hole, and shorten the service life of the nozzle. In addition, it also causes oblique spray, which reduces the print quality of the screen.

From the application of the industry, the nozzle of large format digital printing machine manufacturers must have targeted development, in order to better adapt to the industry applications, equipment manufacturers must also have a wealth of nozzle experience, to ensure the cooperation of nozzles and ink, professional manufacturers can provide complete nozzles Maintenance program to extend the life of the nozzle.


More Info:
Website: http://www.sublimationstar.com
Company Name: Fei Yue Digital Technology Co.,LTD
E-mail: sales@feiyuepaper.com
Tel: 86-025-86628894
Whatsapp: +86 15007920742
Address: Central Road 323, Nanjing, Jiangsu, China

Textile printer is garbled or fan does not turn, what should we do?

In recent days, I have seen a lot of people rushing to ask questions about the failure of the textile printer, mainly because of the garbled phenomenon of the photo machine and the fact that the fan of the printer does not turn. Today, I have probably sorted out some related solutions for your reference. I hope I can bring you some help.

There are two main situations in the garbled version of the inkjet printing machine: one is that the photo machine is garbled, that is, the image that is printed is completely inconsistent with the original image, and the deviation is very large. Another situation is that the display of the photo machine is garbled.

 Textile printer

If the printer is garbled, it can be solved according to the following conditions. First, if the real machine uses a parallel port print line, make sure that the parallel port mode of the computer is ECP. If the mode is correct, check if the data cable or the print cable is normal. If there is any problem, please replace it in time. In addition, there may be a problem with paper feeding. Check if the paper is normal and whether the paper is correct. If these are normal, it may be that the computer software or the system has failed. You can reinstall the Montevideo software or replace the computer and test it. If it still doesn't work, then there may be a problem with the motherboard of the photo machine, so you need to replace it in time.

Another situation is the problem that the photo display is garbled. First of all, please pay attention to whether it is in English. If this is not the case, please check the static electricity or ground connection, or the plug on the screen and the motherboard are not plugged in, just plug it in again. You can also use alcohol to wipe the memory and decryption cards to improve the situation. If it doesn't work, it's probably a display problem, and you need to change the display in time.

 Digital printer

Finally, let's talk about the fan problem of digital inkjet printer. Generally, there is a problem with the connection. You can re-plug it or change the root line. It may also be a problem with the socket. Put the fan in another slot and test it. If it can be used normally, it proves that there is a problem with the socket. Of course, if it can't rotate normally, most of the fan is broken, you need to replace it. In some cases, the fan is faulty due to the motherboard problem. It is best to ask the technician to check it and determine if the motherboard needs to be replaced.

For the time being, I have summed up so much for everyone. I hope that I can help you. I also remind everyone to be careful when using it, so as to avoid unnecessary problems and affect work efficiency.

More Info:
Website: http://www.skyimagepaper.com
Company Name: Fei Yue Digital Technology Co.,LTD
E-mail: sales@feiyuepaper.com
Tel: 86-025-86628894
Whatsapp: +86 15007920742
Address: Central Road 323, Nanjing, Jiangsu, China