when the piezoelectric photo printing machine paper jam,what should we do?

What should I do if the piezoelectric photo printing machine prints the paper during the printout using the photo machine? It should stop or pause the printing and handle the printing paper jam in time. Because the photo machine has a paper pick-up problem during the printout process, it is easy to cause the printout pattern to be scratched, ink-stained, and need to be reprinted to waste consumables and manufacturing time, and even cause damage to the head components in severe cases. For example, paper has a problem with the piezoelectric nozzle being broken. However, the nozzle is the core component of the photo machine, and the price is also very expensive. The nozzle is damaged due to a small printing paper failure, which is a problem that cannot be ignored.

The digital textile printer prints the paper jam problem only in time to deal with it. This is a very easy to solve the fault. The printing paper jam problem often has the following reasons. We just need to find the reason and solve it in time. I will analyze the problem where you want to help you.

1. The nozzle nozzle spacing is too small

Piezoelectric Photo Printing Machine

The distance between the nozzle and the medium is too small, which is the root cause of scraping. Under normal circumstances, the space between the photo frame and the paper is too small, so if the paper is adjusted, it is better to keep the thickness of the coin. . If the thickness of the printing paper medium is too thick, the distance between the nozzles of the lower nozzles can be appropriately adjusted.

2. Gasket damage problem

For example, the photo frame small frame gasket can raise the position of the shelf to a certain extent, reducing the friction. Once the damage is easy, the height of the nozzle is lowered. At this time, we need to replace the small frame and other treatments.

3. Paper feed deviation and paper feed is blocked

When the pattern is output, the left and right deviation of the pattern is checked to check whether the paper feed wheel on the photo machine platform rotates normally. If one of the paper feed rollers does not rotate, it is prone to paper misfeeding, paper deviation or Paper jams and arches cause printing paper; in addition, the printing medium is uneven, the paper is loose, the suction system is abnormal, the printing consumables cannot be close to the platform, or the surface unevenness of the consumables is too large, and the paper jam problem may occur. In particular, some wallpaper makers, in order to meet the requirements of the customer's three-dimensional picture, use the embossed effect of the wallpaper, thepiezoelectric photo machine nozzle can be adjusted to a range of 3mm, and the thermal foaming machine is 1.75mm, once it is higher than this value, Severe wear on the nozzle structure, resulting in damage.

 Inkjet Printer

Finally, when the photo printout is too long, if the length of the printout paper is too long, the paper pattern outputted at the time of printing is not properly wound up. The paper is continuously laid down when printing, and will be stacked on the ground. If it is rolled up, it will block the paper from being laid down and cause the paper to bulge on the platform, and the printing paper will appear.
Therefore, these reasons are easy to cause the photo inkjet printer to print the crep paper. The operator carefully pays attention to the printout. When the problem ccurs, the printing and squeezing of the photo machine can be easily suspended, and the problem of printing the crepe paper can be easily solved. Good nozzles can also avoid printing pattern scratches and need to reprint problems, saving material consumables and production time.

More Info:
Website: www.skyimagepaper.com
Company Name: Fei Yue Digital Technology Co.,LTD
E-mail: sales@feiyuepaper.com
Tel: 86-025-86628894
Whatsapp: +86 15007920742
Address: Central Road 323, Nanjing, Jiangsu, China